Home > Products > Honeywell solenoid valve > GK series > Honeywell standard solenoid valve for medium up to180 degree GK50

Honeywell standard solenoid valve for medium up to180 degree GK50

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: (see below), either brass or cast iron GG25, Membrane: viton and graphit
Media temp.: 0...180C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Working range: 0...10bar
Screwed version, material: brass
DN size: 50mm
Kvs value: 36
Connections: G2
Honeywell standard solenoid valve for liquid medium-AB20

Honeywell standard solenoid valve for liquid medium-AB20


The 2/2-way valves of the AB-series are suitable for general applications and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are
Honeywell standard solenoid valve for liquid medium-AB40

Honeywell standard solenoid valve for liquid medium-AB40


The 2/2-way valves of the AB-series are suitable for general applications and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are
Honeywell solenoid valve(component tested) for potable water AT50

Honeywell solenoid valve(component tested) for potable water AT50


The 2/2-way valves of the AT-series are suitable for potable water and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure.Valve application: liquidMaterials: Casing: brass Internal parts: stainless steel Membrane: EPDMMedia temp.: 0...12
Honeywell MS124 solenoid valve

Honeywell MS124 solenoid valve


MS: pilot operated, two way construction Normally closed Hermetic construction Low pressure drop High performance Direct operated: no minimum pressure differential required to open the valve Pilot operated: minimum pressure differential of 0.05 bar required to open the valve Solder a
Honeywell solenoid valve(component tested) for potable water AT13

Honeywell solenoid valve(component tested) for potable water AT13


The 2/2-way valves of the AT-series are suitable for potable water and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure.Valve application: liquidMaterials: Casing: brass Internal parts: stainless steel Membrane: EPDMMedia temp.: 0...12
Honeywell solenoid valve(component tested) for potable water AT32

Honeywell solenoid valve(component tested) for potable water AT32


The 2/2-way valves of the AT-series are suitable for potable water and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure.Valve application: liquidMaterials: Casing: brass Internal parts: stainless steel Membrane: EPDMMedia temp.: 0...12
Honeywell standard solenoid valve for medium up to180 degree GK32

Honeywell standard solenoid valve for medium up to180 degree GK32


The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.Valve application: gaseous/liquidMaterials: Casing: (see below), either brass or cast iron GG25, Me
Honeywell standard solenoid valve for medium up to180 degree GK40

Honeywell standard solenoid valve for medium up to180 degree GK40


The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.Valve application: gaseous/liquidMaterials: Casing: (see below), either brass or cast iron GG25, Me
Honeywell MS227 solenoid valve

Honeywell MS227 solenoid valve


MS: pilot operated, two way construction Normally closed Hermetic construction Low pressure drop High performance Direct operated: no minimum pressure differential required to open the valve Pilot operated: minimum pressure differential of 0.05 bar required to open the valve Solder and flare
Honeywell standard solenoid valve for medium up to180 degree GK50F

Honeywell standard solenoid valve for medium up to180 degree GK50F


The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.Valve application: gaseous/liquidMaterials: Casing: (see below), either brass or cast iron GG25, Me
Honeywell standard solenoid valve for liquid medium-AB25

Honeywell standard solenoid valve for liquid medium-AB25


The 2/2-way valves of the AB-series are suitable for general applications and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are
Honeywell MD102 solenoid valve

Honeywell MD102 solenoid valve


MD: direct operated, two way construction Normally closed Hermetic construction Low pressure drop High performance Direct operated: no minimum pressure differential required to open the valve Pilot operated: minimum pressure differential of 0.05 bar required to open the valve Solder
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 829.4 ms