Home > Products > Honeywell solenoid valve > GK series > Honeywell standard solenoid valve for medium up to180 degree GK25F

Honeywell standard solenoid valve for medium up to180 degree GK25F

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.
Valve application: gaseous/liquid
Materials: Casing: (see below), either brass or cast iron GG25, Membrane: viton and graphit
Media temp.: 0...180C
Ambient temperature: 0...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Working range: 0...10bar
Flanged version, material: cast iron GG25
DN size: 25mm
Kvs value: 10
Connections: flange
Honeywell MD103 solenoid valve

Honeywell MD103 solenoid valve


MD: direct operated, two way constructionNormally closedHermetic construction• Low pressure dropHigh performanceDirect operated: no minimum pressure differentialrequired to open the valvePilot operated: minimum pressure differential of0.05 bar required to open the valveSolder and flare connect
Honeywell MS124 solenoid valve

Honeywell MS124 solenoid valve


MS: pilot operated, two way construction Normally closed Hermetic construction Low pressure drop High performance Direct operated: no minimum pressure differential required to open the valve Pilot operated: minimum pressure differential of 0.05 bar required to open the valve Solder a
Honeywell standard solenoid valve for liquid medium-AB10

Honeywell standard solenoid valve for liquid medium-AB10


The 2/2-way valves of the AB-series are suitable for general applications and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are
Honeywell MS125 solenoid valve

Honeywell MS125 solenoid valve


MS: pilot operated, two way construction Normally closed Hermetic construction Low pressure drop High performance Direct operated: no minimum pressure differential required to open the valve Pilot operated: minimum pressure differential of 0.05 bar required to open the valve Solder a
Honeywell solenoid valve(component tested) for neutral liquid medium-AV401MS2

Honeywell solenoid valve(component tested) for neutral liquid medium-AV401MS2


The 2/2-way valves of the AV-series are designed for safety function in liquid fuel supply systems. The valves prevent unintended draining of the system and storage tanks in case of malfunction of burner or filter.Valve application: fuel oilMaterials: Casing: brass Internal parts: stainless steel Me
Honeywell solenoid valve(component tested) for neutral liquid medium-AV201MS2

Honeywell solenoid valve(component tested) for neutral liquid medium-AV201MS2


The 2/2-way valves of the AV-series are designed for safety function in liquid fuel supply systems. The valves prevent unintended draining of the system and storage tanks in case of malfunction of burner or filter.Valve application: fuel oilMaterials: Casing: brass Internal parts: stainless steel Me
Honeywell MA042MMS  solenoid valve

Honeywell MA042MMS solenoid valve


Kv-value 0.12 m3/h Maximum pressure PS 30 bar(a) Maximum test pressure PF 42.6 bar(a) Min. pressure differential 0 bar Max. opening pressure differential MOPD 25 bar Max. medium temperature 125 °C Min. medium temperature -45 °C Max. ambient temperature 80 °C Min. ambient temperature -40 Â
Honeywell standard solenoid valve for medium up to180 degree GK13

Honeywell standard solenoid valve for medium up to180 degree GK13


The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.Valve application: gaseous/liquidMaterials: Casing: (see below), either brass or cast iron GG25, Me
Honeywell MS165 solenoid valve

Honeywell MS165 solenoid valve


MS: pilot operated, two way construction Normally closed Hermetic construction Low pressure drop High performance Direct operated: no minimum pressure differential required to open the valve Pilot operated: minimum pressure differential of 0.05 bar required to open the valve Solder a
Honeywell MS103 solenoid valve

Honeywell MS103 solenoid valve


MS: pilot operated, two way construction Normally closed Hermetic construction Low pressure drop High performance Direct operated: no minimum pressure differential required to open the valve Pilot operated: minimum pressure differential of 0.05 bar required to open the valve Solder a
Honeywell standard solenoid valve for medium up to180 degree GK32F

Honeywell standard solenoid valve for medium up to180 degree GK32F


The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.Valve application: gaseous/liquidMaterials: Casing: (see below), either brass or cast iron GG25, Me
Honeywell solenoid valve(component tested) for neutral liquid medium-AV102MS2

Honeywell solenoid valve(component tested) for neutral liquid medium-AV102MS2


The 2/2-way valves of the AV-series are designed for safety function in liquid fuel supply systems. The valves prevent unintended draining of the system and storage tanks in case of malfunction of burner or filter.Valve application: fuel oilMaterials: Casing: brass Internal parts: stainless steel Me
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 1009.2 ms