Home > Products > Honeywell solenoid valve > (component tested)AV series > Honeywell solenoid valve(component tested) for neutral liquid medium-AV402MS2

Honeywell solenoid valve(component tested) for neutral liquid medium-AV402MS2

share
The 2/2-way valves of the AV-series are designed for safety function in liquid fuel supply systems. The valves prevent unintended draining of the system and storage tanks in case of malfunction of burner or filter.
Valve application: fuel oil
Materials: Casing: brass Internal parts: stainless steel Membrane: Viton
Media temp.: 0...90C
Ambient temperature: -10...55C
Operating mode: normally closed
Power supply: 230V 50Hz
Certificates: 5S262 according to DIN EN ISO 23553-1:2009-10
DN size: 40mm
Kvs value: 30
Working range: -0,6...10bar
Connections: G2
Honeywell solenoid valve(component tested) for neutral liquid medium-AV252MS2

Honeywell solenoid valve(component tested) for neutral liquid medium-AV252MS2


The 2/2-way valves of the AV-series are designed for safety function in liquid fuel supply systems. The valves prevent unintended draining of the system and storage tanks in case of malfunction of burner or filter.Valve application: fuel oilMaterials: Casing: brass Internal parts: stainless steel Me
Honeywell standard solenoid valve for medium up to180 degree GK25F

Honeywell standard solenoid valve for medium up to180 degree GK25F


The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.Valve application: gaseous/liquidMaterials: Casing: (see below), either brass or cast iron GG25, Me
Honeywell standard solenoid valve for liquid medium-AB13

Honeywell standard solenoid valve for liquid medium-AB13


The 2/2-way valves of the AB-series are suitable for general applications and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are
Honeywell standard solenoid valve for gaseous and liquid medium-GB25

Honeywell standard solenoid valve for gaseous and liquid medium-GB25


The 2/2-way valves of the GB-series are suitable for general applications and is not dependent operationally on a specific minimum differential pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are not possible to determine precisely in
Honeywell standard solenoid valve for medium up to180 degree GK50

Honeywell standard solenoid valve for medium up to180 degree GK50


The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.Valve application: gaseous/liquidMaterials: Casing: (see below), either brass or cast iron GG25, Me
Honeywell standard solenoid valve for liquid medium-AB25

Honeywell standard solenoid valve for liquid medium-AB25


The 2/2-way valves of the AB-series are suitable for general applications and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are
Honeywell standard solenoid valve for medium up to180 degree GK50F

Honeywell standard solenoid valve for medium up to180 degree GK50F


The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.Valve application: gaseous/liquidMaterials: Casing: (see below), either brass or cast iron GG25, Me
Honeywell MS103 solenoid valve

Honeywell MS103 solenoid valve


MS: pilot operated, two way construction Normally closed Hermetic construction Low pressure drop High performance Direct operated: no minimum pressure differential required to open the valve Pilot operated: minimum pressure differential of 0.05 bar required to open the valve Solder a
Honeywell standard solenoid valve for medium up to180 degree GK13

Honeywell standard solenoid valve for medium up to180 degree GK13


The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.Valve application: gaseous/liquidMaterials: Casing: (see below), either brass or cast iron GG25, Me
Honeywell MS104 solenoid valve

Honeywell MS104 solenoid valve


MS: pilot operated, two way construction Normally closed Hermetic construction Low pressure drop High performance Direct operated: no minimum pressure differential required to open the valve Pilot operated: minimum pressure differential of 0.05 bar required to open the valve Solder a
Honeywell solenoid valve(component tested) for potable water AT10

Honeywell solenoid valve(component tested) for potable water AT10


The 2/2-way valves of the AT-series are suitable for potable water and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure.Valve application: liquidMaterials: Casing: brass Internal parts: stainless steel Membrane: EPDMMedia temp.: 0...12
Honeywell MS227 solenoid valve

Honeywell MS227 solenoid valve


MS: pilot operated, two way construction Normally closed Hermetic construction Low pressure drop High performance Direct operated: no minimum pressure differential required to open the valve Pilot operated: minimum pressure differential of 0.05 bar required to open the valve Solder and flare
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 569.7 ms