Home > Products > Honeywell solenoid valve > M series > Honeywell MS103 solenoid valve

Honeywell MS103 solenoid valve

MS: pilot operated, two way construction
Normally closed
Hermetic construction Low pressure drop
High performance
Direct operated: no minimum pressure differential required to open the valve
Pilot operated: minimum pressure differential of 0.05 bar required to open the valve
Solder and flare connections
Coils for AC and DC
Refrigerants: all CFC, HCFC, HFC, not for ammonia
Maximum pressure PS 35 bar
Maximum test pressure 50 bar
Min. pressure differential MA, MD: 0 bar
MS: 0.05 bar
Max. pressure differential MS: 2 bar
Max. opening pressure
differential MOPD
AC-coil: MA, MD: 25bar
MS: 30 bar
DC-coil: MA, MD: 21bar
MS: 21 bar
Max. medium temperature 125 °C
Min. medium temperature -45 °C
Max. ambient temperature 80 °C
Min. ambient temperature -40 °C
Standard coil voltages AC: 230V, 110V, 24V
DC: 230V, 24V
further voltages on request
Voltage tolerance AC: ±10%
DC: +10%, -5%
Honeywell MS125 solenoid valve

Honeywell MS125 solenoid valve


MS: pilot operated, two way construction Normally closed Hermetic construction Low pressure drop High performance Direct operated: no minimum pressure differential required to open the valve Pilot operated: minimum pressure differential of 0.05 bar required to open the valve Solder a
Honeywell standard solenoid valve for gaseous and liquid medium-GB12VA

Honeywell standard solenoid valve for gaseous and liquid medium-GB12VA


The 2/2-way valves of the GB-series are suitable for general applications and is not dependent operationally on a specific minimum differential pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are not possible to determine precisely in
Honeywell standard solenoid valve for medium up to180 degree GK13

Honeywell standard solenoid valve for medium up to180 degree GK13


The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.Valve application: gaseous/liquidMaterials: Casing: (see below), either brass or cast iron GG25, Me
Honeywell MA062 solenoid valve

Honeywell MA062 solenoid valve


MA: direct operated, angle construction Normally closed Hermetic construction Low pressure drop High performance Direct operated: no minimum pressure differential required to open the valve Pilot operated: minimum pressure differential of 0.05 bar required to open the valve Solder an
Honeywell standard solenoid valve for liquid medium-AB20

Honeywell standard solenoid valve for liquid medium-AB20


The 2/2-way valves of the AB-series are suitable for general applications and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are
Honeywell solenoid valve(component tested) for potable water AT20

Honeywell solenoid valve(component tested) for potable water AT20


The 2/2-way valves of the AT-series are suitable for potable water and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure.Valve application: liquidMaterials: Casing: brass Internal parts: stainless steel Membrane: EPDMMedia temp.: 0...12
Honeywell solenoid valve(component tested) for potable water AT40

Honeywell solenoid valve(component tested) for potable water AT40


The 2/2-way valves of the AT-series are suitable for potable water and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure.Valve application: liquidMaterials: Casing: brass Internal parts: stainless steel Membrane: EPDMMedia temp.: 0...12
Honeywell solenoid valve(component tested) for potable water AT32

Honeywell solenoid valve(component tested) for potable water AT32


The 2/2-way valves of the AT-series are suitable for potable water and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure.Valve application: liquidMaterials: Casing: brass Internal parts: stainless steel Membrane: EPDMMedia temp.: 0...12
Honeywell standard solenoid valve for liquid medium-AB40

Honeywell standard solenoid valve for liquid medium-AB40


The 2/2-way valves of the AB-series are suitable for general applications and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure. They are ideal choice for installation in situations where differential pressure fluctuate greatly and are
Honeywell solenoid valve(component tested) for neutral liquid medium-AV201MS2

Honeywell solenoid valve(component tested) for neutral liquid medium-AV201MS2


The 2/2-way valves of the AV-series are designed for safety function in liquid fuel supply systems. The valves prevent unintended draining of the system and storage tanks in case of malfunction of burner or filter.Valve application: fuel oilMaterials: Casing: brass Internal parts: stainless steel Me
Honeywell MS165 solenoid valve

Honeywell MS165 solenoid valve


MS: pilot operated, two way construction Normally closed Hermetic construction Low pressure drop High performance Direct operated: no minimum pressure differential required to open the valve Pilot operated: minimum pressure differential of 0.05 bar required to open the valve Solder a
Honeywell solenoid valve(component tested) for neutral liquid medium-AV401MS2

Honeywell solenoid valve(component tested) for neutral liquid medium-AV401MS2


The 2/2-way valves of the AV-series are designed for safety function in liquid fuel supply systems. The valves prevent unintended draining of the system and storage tanks in case of malfunction of burner or filter.Valve application: fuel oilMaterials: Casing: brass Internal parts: stainless steel Me
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 1014.5 ms