Home > Products > CEME SOLENOID VALVES > CEME STEAM Soenoid Valves > CEME SOLENOID VALVES STEAM Series 93

CEME SOLENOID VALVES STEAM Series 93

SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.
MIN. PRES: 0 BAR
PARTS IN CONTACT WITH THE FLUID
SEALING: EPDM - FPM - EPDM-KTW
BODY: BRASS WITH SEALING SEAT IN STAINLESS STEEL (except for valve Ø 5).
INTERNAL PARTS: STAINLESS STEEL
FLUIDS: WATER - AIR- GAS - STEAM – DIESEL OIL - NAFTA
ONE WAY DIRECTION VALVE
NON-SERVICEABLE VALVE
VALVE SUPPLIED WITH: THREE POLE PLUG CONNECTOR UNI ISO 4400 (DIN 43650A)- IP65.
MOUNTING POSITION: Any, the position with the coil downwards is not recommended.
AMBIENT TEMPERATURE: 80°C, in D.C. for temperatures higher than 40°C, the performances (M.O.P.D.) could decrease.
ACCESSORIES: - MECHANICAL FILTER ON THE INLET SIDE (9314).
CEME SOLENOID VALVES IRON & CLEAN Series 5524

CEME SOLENOID VALVES IRON & CLEAN Series 5524


STRUCTURAL CHARACTERISTICS Hydraulic body: Brass UNI EN 12165:98 CW 617NInlet :R 1/8.Outlet: hose bibSealing: EPDM rubber.Overall dimensions: according with the drawing of the model.Electrical connections: 6,3 x 0,8 fast-on terminals.Electrical insulation class I: according with EN 60 335-1.Approval
CEME SOLENOID VALVES GAS Series 55

CEME SOLENOID VALVES GAS Series 55


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.GENERAL FEATURESMINIMUM WORKING PRESSURE: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING: EPDM – NBR - FPMBODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: WATER – AIR – STEAM – INFLAMMABLE GAS- INERT GASONE WAY DIRECTION VALVENON-SERVICEABLE VALVEMOUNTI
CEME SOLENOID VALVES WATER Series 55

CEME SOLENOID VALVES WATER Series 55


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.GENERAL FEATURESMINIMUM WORKING PRESSURE: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING: EPDM – NBR - FPMBODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: WATER – AIR – STEAM – INFLAMMABLE GAS- INERT GASONE WAY DIRECTION VALVENON-SERVICEABLE VALVEMOUNTI
CEME SOLENOID VALVES INNERT GAS Series 55

CEME SOLENOID VALVES INNERT GAS Series 55


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.GENERAL FEATURESMINIMUM WORKING PRESSURE: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING: EPDM – NBR - FPMBODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: WATER – AIR – STEAM – INFLAMMABLE GAS- INERT GASONE WAY DIRECTION VALVENON-SERVICEABLE VAL
CEME SOLENOID VALVES IRON & CLEAN Series 5523

CEME SOLENOID VALVES IRON & CLEAN Series 5523


STRUCTURAL CHARACTERISTICS Hydraulic body: Brass UNI EN 12165:98 CW 617NInlet :R 1/8.Outlet: hose bibSealing: EPDM rubber.Overall dimensions: according with the drawing of the model.Electrical connections: 6,3 x 0,8 fast-on terminals.Electrical insulation class I: according with EN 60 335-1.Approval
CEME SOLENOID VALVES STEAM Series 55

CEME SOLENOID VALVES STEAM Series 55


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.GENERAL FEATURESMINIMUM WORKING PRESSURE: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING: EPDM – NBR - FPMBODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: WATER – AIR – STEAM – INFLAMMABLE GAS- INERT GASONE WAY DIRECTION VALVENON-SERVICEABLE VALVEMOUNTI
CEME SOLENOID VALVES IRON & CLEAN Series 4413

CEME SOLENOID VALVES IRON & CLEAN Series 4413


STRUCTURAL CHARACTERISTICSHydraulic body: Brass UNI EN 12165:98 CW 617NInlet :R 1/8.Outlet: hose bibSealing: EPDM rubber.Electrical connections: 6,3 x 0,8 fast-on terminals.Electrical insulation class I: according with EN 60 335-1.Approvals: IMQ;VDE; CE;WORKING CHARACTERISTICSWorking fluid: steamMax
CEME SOLENOID VALVES IRON & CLEAN Series 6650

CEME SOLENOID VALVES IRON & CLEAN Series 6650


STRUCTURAL CHARACTERISTICS Hydraulic body: Brass UNI EN 12165:98 CW 617NInlet :R 1/8.Outlet: hose bibSealing: EPDM rubber.Electrical connections: 6,3 x 0,8 fast-on terminals.Electrical insulation class I: according with EN 60 335-1.Approvals: VDE; CE; WORKING CHARACTERISTICS Working fluid: steamMaxi
CEME SOLENOID VALVES STEAM Series 90

CEME SOLENOID VALVES STEAM Series 90


SOLENOID VALVE PILOT OPERATED 2/2 WAY N.C.MIN. PRES: 1 BARPARTS IN CONTACT WITH THE FLUIDSEALING: PTFE The principal closing is via a PTFE piston with PTFE radial seal bands , graphite loaded, self-lubricating.BODY: NICKEL-PLATED BRASS WITH SEALING SEAT IN STAINLESS STEEL.INTERNAL PA
CEME SOLENOID VALVES IRON & CLEAN Series 5522

CEME SOLENOID VALVES IRON & CLEAN Series 5522


STRUCTURAL CHARACTERISTICSHydraulic body: Brass UNI EN 12165:98 CW 617NInlet :R 1/8.Outlet: hose bibSealing: EPDM rubber.Overall dimensions: according with the drawing of the model.Electrical connections: 6,3 x 0,8 fast-on terminals.Electrical insulation class I: according with EN 60 335-1.Approvals
CEME SOLENOID VALVES WATER Series 84

CEME SOLENOID VALVES WATER Series 84


SOLENOID VALVE SERVO-ACTUATED 2/2 WAY N.C.MIN. PRES: 0 BARPARTS IN CONTACT WITH THE FLUIDSEALING: NBR on request FPM - EPDM EPDM-KTW sealing approved and DVGW certified for interception of potable waterBODYz; BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: WATER- AIR - LIG
CEME SOLENOID VALVES REFRIGERANTS Series  68SC

CEME SOLENOID VALVES REFRIGERANTS Series 68SC


SOLENOID VALVE PILOT OPERATED 2/2 WAY N.C.GENERAL FEATURESMIN. PRES: 0,1 barPARTS IN CONTACT WITH THE FLUIDSEALING: PTFEBODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: ALL TYPE OF REFRIGERANT FLUIDS EXCEPT AMMONIA (NH3)ONE WAY DIRECTION VALVE NON-SERVICEABLE VALVE VALVE SUPPLIED WITH: - THREE PO
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 942.1 ms