Home > Products > CEME SOLENOID VALVES > CEME STEAM Soenoid Valves > CEME SOLENOID VALVES STEAM Series 90

CEME SOLENOID VALVES STEAM Series 90

SOLENOID VALVE PILOT OPERATED 2/2 WAY N.C.

MIN. PRES: 1 BAR
PARTS IN CONTACT WITH THE FLUID
SEALING: PTFE The principal closing is via a PTFE piston with PTFE radial seal bands , graphite loaded, self-lubricating.
BODY: NICKEL-PLATED BRASS WITH SEALING SEAT IN STAINLESS STEEL.
INTERNAL PARTS: STAINLESS STEEL
FLUIDS: STEAM
ONE WAY DIRECTION VALVE
SERVICEABLE VALVE
VALVE SUPPLIED WITH: THREE POLE PLUG CONNECTOR UNI ISO 4400 (DIN 43650A)-IP65
MOUNTING POSITION: Any, the position with the coil downwards is not recommended. For the models 9017,9018,9019 we advice to install the valve with the coil vertical.
AMBIENT TEMPERATURE: 80°C ,in D.C. for temperatures higher than 40°C, the performances (M.O.P.D.) could decrease.
CEME SOLENOID VALVES STEAM Series 66

CEME SOLENOID VALVES STEAM Series 66


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.GENERAL FEATURESMIN. PRES: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING: EPDM - NBR - FPMBODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: WATER - AIR - STEAM - GAS – DIESEL OIL- NAFTAONE WAY DIRECTION VALVE NON-SERVICEABLE VALVE MOUNTING POSITION: Any, the
CEME SOLENOID VALVES WATER Series 61

CEME SOLENOID VALVES WATER Series 61


SOLENOID VALVE DIRECT ACTING 3/2 WAY N.O.GENERAL FEATURESMIN. PRES: 0 barPARTS IN CONTACT WITH THR FLUIDSEALING: EPDM - NBR - FPMBODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: WATER - AIR - STEAM - GAS – LIGHT OILSSTANDARD VERSION: Normally opened, inlet from port 2SERVICEABLE VALVE MOUNTING PO
CEME SOLENOID VALVES IRON & CLEAN Series 5521

CEME SOLENOID VALVES IRON & CLEAN Series 5521


STRUCTURAL CHARACTERISTICSHydraulic body: Brass UNI EN 12165:98 CW 617NInlet :R 1/8.Outlet: hose bibSealing: EPDM rubber.Overall dimensions: according with the drawing of the model.Electrical connections: 6,3 x 0,8 fast-on terminals.Electrical insulation class I: according with EN 60 335-1.Approvals
CEME SOLENOID VALVES REFRIGERANTS Series 68AD

CEME SOLENOID VALVES REFRIGERANTS Series 68AD


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.GENERAL FEATURESMIN. PRES: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING PTFEBODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS ALL TYPE OF REFRIGERANT FLUIDS EXCEPT AMMONIA (NH3)ONE WAY DIRECTION VALVE NON-SERVICEABLE VALVE VALVE SUPPLIED WITH: - THREE POLE PLUG
CEME SOLENOID VALVES STEAM Series 53

CEME SOLENOID VALVES STEAM Series 53


SOLENOID VALVE DIRECT ACTING 3/2 WAY N.C.GENERAL FEATURESMIN. PRES: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING: HNBR - NBR – FPM- EPDMBODY: BRASSINTERNAL PARTS: STAINLESS STEELVALVE SUPPLIED WITH: BRASS TUBE GUIDE (5311, 5315, 5316, 5370) STAINLESS STEEL TUBE GUIDE (5313)
CEME SOLENOID VALVES IRON & CLEAN Series 5524

CEME SOLENOID VALVES IRON & CLEAN Series 5524


STRUCTURAL CHARACTERISTICS Hydraulic body: Brass UNI EN 12165:98 CW 617NInlet :R 1/8.Outlet: hose bibSealing: EPDM rubber.Overall dimensions: according with the drawing of the model.Electrical connections: 6,3 x 0,8 fast-on terminals.Electrical insulation class I: according with EN 60 335-1.Approval
CEME SOLENOID VALVES INNERT GAS Series 61

CEME SOLENOID VALVES INNERT GAS Series 61


SOLENOID VALVE DIRECT ACTING 3/2 WAY N.O.GENERAL FEATURESMIN. PRES: 0 barPARTS IN CONTACT WITH THR FLUIDSEALING: EPDM - NBR - FPMBODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: WATER - AIR - STEAM - GAS – LIGHT OILSSTANDARD VERSION: Normally opened, inlet from port 2SERVICEABLE VALVE MOUNTING PO
CEME SOLENOID VALVES REFRIGERANTS Series  68SC

CEME SOLENOID VALVES REFRIGERANTS Series 68SC


SOLENOID VALVE PILOT OPERATED 2/2 WAY N.C.GENERAL FEATURESMIN. PRES: 0,1 barPARTS IN CONTACT WITH THE FLUIDSEALING: PTFEBODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: ALL TYPE OF REFRIGERANT FLUIDS EXCEPT AMMONIA (NH3)ONE WAY DIRECTION VALVE NON-SERVICEABLE VALVE VALVE SUPPLIED WITH: - THREE PO
CEME SOLENOID VALVES REFRIGERANTS Series 59

CEME SOLENOID VALVES REFRIGERANTS Series 59


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.GENERAL FEATURESMIN. PRES: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING BODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: ALL TYPES OF REFRIGERANT FLUIDS EXCEPT AMMONIA (NH3)ONE WAY DIRECTION VALVE NON-SERVICEABLE VALVE MOUNTING POSITION: Any; to obtain the be
CEME SOLENOID VALVES INNERT GAS Series 83

CEME SOLENOID VALVES INNERT GAS Series 83


SOLENOID VALVE PILOT OPERATED 2/2 WAY N.C.MIN. PRES: 0,1 bar (models 8332/33/34 0 bar)PARTS IN CONTACT WITH THE FLUIDSEALING: FPM, NBR for 8332-8333-8334BODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: AIR – WATER - INERT GAS - LIGHT OILSONE WAY DIRECTION VALVE SERVICEABLE VALVE VALVE SUPPLIED WI
CEME SOLENOID VALVES IRON & CLEAN Series 5554

CEME SOLENOID VALVES IRON & CLEAN Series 5554


STRUCTURAL CHARACTERISTICS Hydraulic body: Brass UNI EN 12165:98 CW 617NInlet :R 1/8.Outlet: hose bibSealing: EPDM rubber.Overall dimensions: according with the drawing of the model.Electrical connections: 6,3 x 0,8 fast-on terminals.Electrical insulation class I: according with EN 60 335-1.Approval
CEME SOLENOID VALVES WATER Series 67

CEME SOLENOID VALVES WATER Series 67


GENERAL FEATURESMIN. PRES: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING: EPDM - NBR - FPMBODY: BRASS WITH SEALING SEAT IN STAINLESS STEELSTAINLESS STEEL TUBE GUIDE: - Metallic sealing with the body for safety sealing also for high temperature
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 946.8 ms