Home > Products > CEME SOLENOID VALVES > CEME REFRIGERANTS Solenoid Valves > CEME SOLENOID VALVES REFRIGERANTS Series 59

CEME SOLENOID VALVES REFRIGERANTS Series 59

SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.

GENERAL FEATURES
MIN. PRES: 0 bar
PARTS IN CONTACT WITH THE FLUID
SEALING
BODY: BRASS
INTERNAL PARTS: STAINLESS STEEL
FLUIDS: ALL TYPES OF REFRIGERANT FLUIDS EXCEPT AMMONIA (NH3)
ONE WAY DIRECTION VALVE
NON-SERVICEABLE VALVE
MOUNTING POSITION: Any; to obtain the best performances the valves has to be installed with the coil vertical;
the position with the coil downwards is not recommended
AMBIENT TEMPERATURE: 80°C , in D.C. for temperatures higher than 40°C, the performances ( M.O.P.D.) could decrease.
SPECIAL EXECUTIONS: SEALING IN NEOPRENE
ACCESSORIES: THREE POLE PLUG CONNECTOR UNI ISO 6952 (DIN 43650B)-IP65
CEME SOLENOID VALVES AIR Series 93

CEME SOLENOID VALVES AIR Series 93


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.MIN. PRES: 0 BARPARTS IN CONTACT WITH THE FLUIDSEALING: EPDM - FPM - EPDM-KTWBODY: BRASS WITH SEALING SEAT IN STAINLESS STEEL (except for valve Ø 5).INTERNAL PARTS: STAINLESS STEELFLUIDS: WATER - AIR- GAS - STEAM – DIESEL OIL - NAFTAONE WAY DIREC
CEME SOLENOID VALVES AIR Series 85

CEME SOLENOID VALVES AIR Series 85


SOLENOID VALVE PILOT OPERATED 2/2 WAY N.C.MIN. PRES: 0,25 BARPARTS IN CONTACT WITH THE FLUIDSEALING: NBR on request FPM - EPDM EPDM-KTW sealing approved and DVGW certified for interception of potable waterBODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: WATER- AIR - LIGHT OILSON
CEME SOLENOID VALVES INNERT GAS Series 99

CEME SOLENOID VALVES INNERT GAS Series 99


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.GENERAL FEATURESMIN. PRES: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING: EPDM - PTFE - RULON® - FPMBODY: BRASS WITH SEALING SEAT IN STAINLESS STEEL (9912,9913,9914)STAINLESS STEEL TUBE GUIDE: - Metallic sealing with the body for safety
CEME SOLENOID VALVES AIR Series 87

CEME SOLENOID VALVES AIR Series 87


SOLENOID VALVE PILOT OPERATED 2/2 WAY N.OMIN. PRES: 0,3 BARPARTS IN CONTACT WITH THE FLUIDSEALING: NBR on request FPM - EPDM EPDM-KTW sealing approved and DVGW certified for interception of potable waterBODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: WATER- AIR - LIGHT OILSONE
CEME SOLENOID VALVES WATER Series 88

CEME SOLENOID VALVES WATER Series 88


BI-STABLE SOLENOID VALVE PILOT OPERATED 2/2 WAY N.C. MIN. PRES: 0,25 BAR PARTS IN CONTACT WITH THE FLUID SEALING: NBR on request FPM, EPDM, EPDM-KTW. BODY: BRASS INTERNAL PARTS: STAINLESS STEEL FLUIDS: WATER-AIR ONE WAY DIRECTION VALVE SERVICEABLE VALVE VALVE WITH WATER HAMMER DEVICE FOR
CEME SOLENOID VALVES INNERT GAS Series 61

CEME SOLENOID VALVES INNERT GAS Series 61


SOLENOID VALVE DIRECT ACTING 3/2 WAY N.O.GENERAL FEATURESMIN. PRES: 0 barPARTS IN CONTACT WITH THR FLUIDSEALING: EPDM - NBR - FPMBODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: WATER - AIR - STEAM - GAS – LIGHT OILSSTANDARD VERSION: Normally opened, inlet from port 2SERVICEABLE VALVE MOUNTING PO
CEME SOLENOID VALVES INNERT GAS Series 62

CEME SOLENOID VALVES INNERT GAS Series 62


SOLENOID VALVE DIRECT ACTING 3/2 WAY N.C.GENERAL FEATURESMIN. PRES: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING: EPDM - NBR - FPM - HNBRBODY: BRASS WITH SEALING SEAT IN STAINLESS STEELSTAINLESS STEEL TUBE GUIDE: - Metallic sealing with the body for safety se
CEME SOLENOID VALVES GAS Series 66

CEME SOLENOID VALVES GAS Series 66


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.GENERAL FEATURESMIN. PRES: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING: EPDM - NBR - FPMBODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: WATER - AIR - STEAM - GAS – DIESEL OIL- NAFTAONE WAY DIRECTION VALVE NON-SERVICEABLE VALVE MOUNTING POSITION: Any, the
CEME SOLENOID VALVES WATER Series 93 CM

CEME SOLENOID VALVES WATER Series 93 CM


SOLENOID VALVE MANUAL OVERRIDE DIRECT ACTING 2/2 WAY N.C.MIN. PRES: 0 BARPARTS IN CONTACT WITH THE FLUIDSEALING: FPMBODY: BRASS NICKEL-PLATED BRASS (9399)INTERNAL PARTS: STAINLESS STEELFLUIDS: DIESEL OIL, WATER, LIGHT OILSONE WAY DIRECTION VALVE NON-SERVICEABLE VALVE MANUAL CONTROL FOR OPENIN
CEME SOLENOID VALVES IRON & CLEAN Series 4424

CEME SOLENOID VALVES IRON & CLEAN Series 4424


STRUCTURAL CHARACTERISTICSHydraulic body: Brass UNI EN 12165:98 CW 617NInlet :R 1/8.Outlet: hose bibSealing: EPDM rubber.Electrical connections: 6,3 x 0,8 fast-on terminals.Electrical insulation class I: according with EN 60 335-1.Approvals: IMQ;VDE; CE;WORKING CHARACTERISTICSWorking fluid: steamMax
CEME SOLENOID VALVES GAS Series 55

CEME SOLENOID VALVES GAS Series 55


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.GENERAL FEATURESMINIMUM WORKING PRESSURE: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING: EPDM – NBR - FPMBODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: WATER – AIR – STEAM – INFLAMMABLE GAS- INERT GASONE WAY DIRECTION VALVENON-SERVICEABLE VALVEMOUNTI
CEME SOLENOID VALVES WATER Series 66

CEME SOLENOID VALVES WATER Series 66


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C. GENERAL FEATURES MIN. PRES: 0 bar PARTS IN CONTACT WITH THE FLUID SEALING: EPDM - NBR - FPM BODY: BRASS INTERNAL PARTS: STAINLESS STEEL FLUIDS: WATER - AIR - STEAM - GAS – DIESEL OIL- NAFTA ONE WAY DIRECTION VALVE NON-SERVICEABLE VALVE MOUNT
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 1051 ms