Home > Products > CEME SOLENOID VALVES > CEME AIR Solenoid Valves > CEME SOLENOID VALVES AIR Series 84

CEME SOLENOID VALVES AIR Series 84

SOLENOID VALVE SERVO-ACTUATED 2/2 WAY N.C.

MIN. PRES: 0 BAR
PARTS IN CONTACT WITH THE FLUID
SEALING: NBR on request FPM - EPDM
EPDM-KTW sealing approved and DVGW certified for interception of potable water
BODY: BRASS
INTERNAL PARTS: STAINLESS STEEL
FLUIDS:WATER- AIR - LIGHT OILS
ONE WAY DIRECTION VALVE
SERVICEABLE VALVE
VALVE SUPPLIED WITH: THREE POLE PLUG CONNECTOR UNI ISO 4400 (DIN 43650A)-IP65
MOUNTING POSITION: We advice installation of the valve with the coil vertical. Models 8417,8418,8419 must be mounted in the horizontal position with the coil vertical .
AMBIENT TEMPERATURE: 80°C, in D.C. for temperatures higher than 40°C, the performances (M.O.P.D.) could decrease.
SPECIAL EXECUTIONS: - VERSION WITH WATER HAMMER DEVICE FOR SLOWER CLOSING TIME
- FOR MODELS 8415 AND 8416 , COIL TYPE B20 (30 W) IS AVAILABLE TO INCREASE PERFORMANCES (M.O.P.D.) IN D.C. TO 4 BAR.
- VERSION WITH KTW HOMOLOGATION.
CEME SOLENOID VALVES INNERT GAS Series 55

CEME SOLENOID VALVES INNERT GAS Series 55


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.GENERAL FEATURESMINIMUM WORKING PRESSURE: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING: EPDM – NBR - FPMBODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: WATER – AIR – STEAM – INFLAMMABLE GAS- INERT GASONE WAY DIRECTION VALVENON-SERVICEABLE VAL
CEME SOLENOID VALVES IRON & CLEAN Series 5521

CEME SOLENOID VALVES IRON & CLEAN Series 5521


STRUCTURAL CHARACTERISTICSHydraulic body: Brass UNI EN 12165:98 CW 617NInlet :R 1/8.Outlet: hose bibSealing: EPDM rubber.Overall dimensions: according with the drawing of the model.Electrical connections: 6,3 x 0,8 fast-on terminals.Electrical insulation class I: according with EN 60 335-1.Approvals
CEME SOLENOID VALVES INNERT GAS Series 93

CEME SOLENOID VALVES INNERT GAS Series 93


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.MIN. PRES: 0 BARPARTS IN CONTACT WITH THE FLUIDSEALING: EPDM - FPM - EPDM-KTWBODY: BRASS WITH SEALING SEAT IN STAINLESS STEEL (except for valve Ø 5).INTERNAL PARTS: STAINLESS STEELFLUIDS: WATER - AIR- GAS - STEAM – DIESEL OIL - NAFTAONE WAY DIRECTION VALVE
CEME SOLENOID VALVES IRON & CLEAN Series 5523

CEME SOLENOID VALVES IRON & CLEAN Series 5523


STRUCTURAL CHARACTERISTICS Hydraulic body: Brass UNI EN 12165:98 CW 617NInlet :R 1/8.Outlet: hose bibSealing: EPDM rubber.Overall dimensions: according with the drawing of the model.Electrical connections: 6,3 x 0,8 fast-on terminals.Electrical insulation class I: according with EN 60 335-1.Approval
CEME SOLENOID VALVES IRON & CLEAN Series 5513

CEME SOLENOID VALVES IRON & CLEAN Series 5513


STRUCTURAL CHARACTERISTICSHydraulic body: Brass UNI EN 12165:98 CW 617NInlet :R 1/8.Outlet: hose bibSealing: EPDM rubber.Overall dimensions: according with the drawing of the model.Electrical connections: 6,3 x 0,8 fast-on terminals.Electrical insulation class I: according with EN 60 335-1.Approvals
CEME SOLENOID VALVES WATER Series 99

CEME SOLENOID VALVES WATER Series 99


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.GENERAL FEATURESMIN. PRES: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING: EPDM - PTFE - RULON® - FPMBODY: BRASS WITH SEALING SEAT IN STAINLESS STEEL (9912,9913,9914)STAINLESS STEEL TUBE GUIDE: - Metallic sealing with the body for safety
CEME SOLENOID VALVES HVAC Series 6601

CEME SOLENOID VALVES HVAC Series 6601


STRUCTURAL CHARACTERISTICS Hydraulic body: Brass UNI EN 12165:98 CW 617NInlet :R 1/8.Outlet: hose bibSealing: EPDM rubber.Electrical connections: 6,3 x 0,8 fast-on terminals.Electrical insulation class I: according with EN 60 335-1.Approvals: VDE; CE; WORKING CHARACTERISTICS Working fluid: steamMaxi
CEME SOLENOID VALVES IRON & CLEAN Series 4413

CEME SOLENOID VALVES IRON & CLEAN Series 4413


STRUCTURAL CHARACTERISTICSHydraulic body: Brass UNI EN 12165:98 CW 617NInlet :R 1/8.Outlet: hose bibSealing: EPDM rubber.Electrical connections: 6,3 x 0,8 fast-on terminals.Electrical insulation class I: according with EN 60 335-1.Approvals: IMQ;VDE; CE;WORKING CHARACTERISTICSWorking fluid: steamMax
CEME SOLENOID VALVES GAS Series 55

CEME SOLENOID VALVES GAS Series 55


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.GENERAL FEATURESMINIMUM WORKING PRESSURE: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING: EPDM – NBR - FPMBODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: WATER – AIR – STEAM – INFLAMMABLE GAS- INERT GASONE WAY DIRECTION VALVENON-SERVICEABLE VALVEMOUNTI
CEME SOLENOID VALVES IRON & CLEAN Series 5551

CEME SOLENOID VALVES IRON & CLEAN Series 5551


STRUCTURAL CHARACTERISTICS Hydraulic body: Brass UNI EN 12165:98 CW 617NInlet :R 1/8.Outlet: hose bibSealing: EPDM rubber.Overall dimensions: according with the drawing of the model.Electrical connections: 6,3 x 0,8 fast-on terminals.Electrical insulation class I: according with EN 60 335-1.Approval
CEME SOLENOID VALVES INNERT GAS Series 99

CEME SOLENOID VALVES INNERT GAS Series 99


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.GENERAL FEATURESMIN. PRES: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING: EPDM - PTFE - RULON® - FPMBODY: BRASS WITH SEALING SEAT IN STAINLESS STEEL (9912,9913,9914)STAINLESS STEEL TUBE GUIDE: - Metallic sealing with the body for safety
CEME SOLENOID VALVES WATER Series 67

CEME SOLENOID VALVES WATER Series 67


GENERAL FEATURESMIN. PRES: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING: EPDM - NBR - FPMBODY: BRASS WITH SEALING SEAT IN STAINLESS STEELSTAINLESS STEEL TUBE GUIDE: - Metallic sealing with the body for safety sealing also for high temperature
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 958.5 ms