Home > Products > CEME SOLENOID VALVES > CEME AIR Solenoid Valves > CEME SOLENOID VALVES AIR Series 55

CEME SOLENOID VALVES AIR Series 55

SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.

GENERAL FEATURES
MINIMUM WORKING PRESSURE: 0 bar
PARTS IN CONTACT WITH THE FLUID
SEALING: EPDM – NBR - FPM
BODY: BRASS
INTERNAL PARTS: STAINLESS STEEL
FLUIDS WATER – AIR – STEAM – INFLAMMABLE GAS- INERT GAS
ONE WAY DIRECTION VALVE
NON-SERVICEABLE VALVE
MOUNTING POSITION: Any, the position with the coil downwards is not recommended.
AMBIENT TEMPERATURE: 80°C, in D.C. for temperatures higher than 40°C, the performances ( M.O.P.D.) could decrease
SPECIAL EXECUTIONS: NICKEL-PLATED VALVE BODY
BY-PASS= COMMUNICATION HOLE BETWEEN INLET AND OUTLET TO ALLOW A REDUCED BUT
CONSTANT PASSAGE OF FLUID
ACCESSORIES: THREE POLE PLUG CONNECTOR UNI ISO 6952 (DIN 43650B) -IP65
MECHANICAL FILTER ON THE INLET SIDE (5505-5510-5511-5512-5535-5536-5537)
CEME SOLENOID VALVES INNERT GAS Series 62

CEME SOLENOID VALVES INNERT GAS Series 62


SOLENOID VALVE DIRECT ACTING 3/2 WAY N.C.GENERAL FEATURESMIN. PRES: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING: EPDM - NBR - FPM - HNBRBODY: BRASS WITH SEALING SEAT IN STAINLESS STEELSTAINLESS STEEL TUBE GUIDE: - Metallic sealing with the body for safety se
CEME SOLENOID VALVES INNERT GAS Series 99

CEME SOLENOID VALVES INNERT GAS Series 99


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.GENERAL FEATURESMIN. PRES: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING: EPDM - PTFE - RULON® - FPMBODY: BRASS WITH SEALING SEAT IN STAINLESS STEEL (9912,9913,9914)STAINLESS STEEL TUBE GUIDE: - Metallic sealing with the body for safety
CEME SOLENOID VALVES AIR Series 87

CEME SOLENOID VALVES AIR Series 87


SOLENOID VALVE PILOT OPERATED 2/2 WAY N.OMIN. PRES: 0,3 BARPARTS IN CONTACT WITH THE FLUIDSEALING: NBR on request FPM - EPDM EPDM-KTW sealing approved and DVGW certified for interception of potable waterBODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: WATER- AIR - LIGHT OILSONE
CEME SOLENOID VALVES STEAM Series 93

CEME SOLENOID VALVES STEAM Series 93


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.MIN. PRES: 0 BARPARTS IN CONTACT WITH THE FLUIDSEALING: EPDM - FPM - EPDM-KTWBODY: BRASS WITH SEALING SEAT IN STAINLESS STEEL (except for valve Ø 5).INTERNAL PARTS: STAINLESS STEELFLUIDS: WATER - AIR- GAS - STEAM – DIESEL OIL - NAFTAONE WAY DIRECTION VALV
CEME SOLENOID VALVES INNERT GAS Series 83

CEME SOLENOID VALVES INNERT GAS Series 83


SOLENOID VALVE PILOT OPERATED 2/2 WAY N.C.MIN. PRES: 0,1 bar (models 8332/33/34 0 bar)PARTS IN CONTACT WITH THE FLUIDSEALING: FPM, NBR for 8332-8333-8334BODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: AIR – WATER - INERT GAS - LIGHT OILSONE WAY DIRECTION VALVE SERVICEABLE VALVE VALVE SUPPLIED WI
CEME SOLENOID VALVES IRON & CLEAN Series 6650

CEME SOLENOID VALVES IRON & CLEAN Series 6650


STRUCTURAL CHARACTERISTICS Hydraulic body: Brass UNI EN 12165:98 CW 617NInlet :R 1/8.Outlet: hose bibSealing: EPDM rubber.Electrical connections: 6,3 x 0,8 fast-on terminals.Electrical insulation class I: according with EN 60 335-1.Approvals: VDE; CE; WORKING CHARACTERISTICS Working fluid: steamMaxi
CEME SOLENOID VALVES INNERT GAS Series 59

CEME SOLENOID VALVES INNERT GAS Series 59


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.GENERAL FEATURESMIN. PRES: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING BODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS ALL TYPES OF REFRIGERANT FLUIDS EXCEPT AMMONIA (NH3)ONE WAY DIRECTION VALVE NON-SERVICEABLE VALVE MOUNTING POSITION: Any; to obtain the bes
CEME SOLENOID VALVES REFRIGERANTS Series 59

CEME SOLENOID VALVES REFRIGERANTS Series 59


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.C.GENERAL FEATURESMIN. PRES: 0 barPARTS IN CONTACT WITH THE FLUIDSEALING BODY: BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS: ALL TYPES OF REFRIGERANT FLUIDS EXCEPT AMMONIA (NH3)ONE WAY DIRECTION VALVE NON-SERVICEABLE VALVE MOUNTING POSITION: Any; to obtain the be
CEME SOLENOID VALVES IRON & CLEAN Series 4423

CEME SOLENOID VALVES IRON & CLEAN Series 4423


STRUCTURAL CHARACTERISTICS Hydraulic body: Brass UNI EN 12165:98 CW 617NInlet :R 1/8.Outlet: hose bibSealing: EPDM rubber.Electrical connections: 6,3 x 0,8 fast-on terminals.Electrical insulation class I: according with EN 60 335-1.Approvals: IMQ;VDE; CE; WORKING CHARACTERISTICS Working fluid: steam
CEME SOLENOID VALVES COFFEE Series 6611

CEME SOLENOID VALVES COFFEE Series 6611


STRUCTURAL CHARACTERISTICS Hydraulic body: Brass UNI EN 12165:98 CW 617NInlet :R 1/8.Outlet: hose bibSealing: EPDM rubber.Electrical connections: 6,3 x 0,8 fast-on terminals.Electrical insulation class I: according with EN 60 335-1.Approvals: VDE; CE; WORKING CHARACTERISTICS Working fluid: steamMaxi
CEME SOLENOID VALVES AIR Series 65

CEME SOLENOID VALVES AIR Series 65


SOLENOID VALVE DIRECT ACTING 2/2 WAY N.O.GENERAL FEATURESMINIMUM WORKING PRESSURE: 0 barPARTS IN CONTACT WITH THE FLUIDSEALIND: PTFEBODY : BRASSINTERNAL PARTS: STAINLESS STEELFLUIDS ALL TYPES OF REFRIGERANT FLUIDS EXCEPT AMMONIA (NH3)ONE WAY DIRECTION VALVENON-SERVICEABLE VALVEMOUNTING POSI
CEME SOLENOID VALVES WATER Series 62

CEME SOLENOID VALVES WATER Series 62


SOLENOID VALVE DIRECT ACTING 3/2 WAY N.C. GENERAL FEATURES MIN. PRES: 0 bar PARTS IN CONTACT WITH THE FLUID SEALING: EPDM - NBR - FPM - HNBR BODY: BRASS WITH SEALING SEAT IN STAINLESS STEEL STAINLESS STEEL TUBE GUIDE: - Metallic sealing with the body for safety
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 1014.6 ms