Home > Products > BANICO Solenoid Valves > > BANICO Gas Solenoid Valves With Flow Rate Adjustor ZEVR50

BANICO Gas Solenoid Valves With Flow Rate Adjustor ZEVR50

OPERATION AND INSTALLATION
Two-way, normally-closed – energise to open.
Rapid opening.
Adjustable flow rate regulator on top of the coil.
Mounting direct on pipeline more or less 90 degrees (max) from the vertical axis.
TECHNICAL SPECIFICATION
Opening time <1 second.
Closing time <1 second.
Max number of operations : 20 per minute.
1/4” Inlet and outlet plugs.
Incorporated AISI 303 steel mesh filter.
Cable entry gland PG11 Live, Neutral, Earth.
Protection to IP54
NBR based seal with a strong resistance to hydrocarbons (UNI 4916-74).
Bodies and flanges in diecast aluminium.
AISI 302 steel pressure spring.
Chromate Fe 37 steel armature.
Ambient temperature -15°C to 60°C.
Coil temperature about 70°C
STANDARDS AND APPROVALS
Class “A” BS EN161:2002 Approved.
British Gas & European Standards.
90/396/EEC - 73/23/EEC - 89/336/EEC .
Certificate CE EC-87/07/009.
ELECTRICAL SPECIFICATION
Supply voltage 230V (+10%-15%) 50-60Hz.
Coils to Class F, 360° rotation, suitable for permanent excitation.
BANICO Slow opening gas solenoid valves ZEVS25

BANICO Slow opening gas solenoid valves ZEVS25


OPERATION AND INSTALLATIONTwo-way, normally-closed – energise to open. Slow opening. Mounting direct on pipeline more or less 90 degrees (max) from the vertical axis. TECHNICAL SPECIFICATION Slow opening from 1 to 30 seconds, step pressure and flow regulation from top of the coil. Closing ti
BANICO Solenoid valves BANICO 3/2 way ¼” Solenoid Valves Normally Closed

BANICO Solenoid valves BANICO 3/2 way ¼” Solenoid Valves Normally Closed


Used in applications which require actuation and automatic discharge in the followings: Sterilisers * Air compressors Espresso coffe machines * Pilot valves Diesel oil burners * Polyurethane plants Water treatment plantsSPECIFICATIONS:Type: 20B141Connection: 1/4” BSP femaleThrough bore
BANICO Normally Closed Valve Bodies Servo-Assited Diaphragm

BANICO Normally Closed Valve Bodies Servo-Assited Diaphragm


Solenoid valves suitable for large flow capacity, suitable for water,air, oil, inert gases and other fluids non-corrosive for copper alloys, with viscosity up to 2"Engler
BANICO Gas Solenoid Valves ZEV50-24

BANICO Gas Solenoid Valves ZEV50-24


OPERATION AND INSTALLATIONTwo-way, normally-closed – energise to open. Rapid opening. Mounting direct on pipeline more or less 90 degrees (max) from the vertical axis. TECHNICAL SPECIFICATION Opening time
BANICO Solenoid valves  NORMALLY OPEN VALVE BODIES

BANICO Solenoid valves NORMALLY OPEN VALVE BODIES


Suitable for large flow capacity, suitable for water, air, oil, inert gases and other fluids which are non-corrosive for copper alloys, with viscosity up to 2° Engler INSTALLATION AND OPERATION> 2 way valve normally-open> Servo-assisted membrane actuator> Female end connections, size G3/8" to 2"
BANICO Gas Solenoid Valves With Flow Rate Adjustor ZEVR50

BANICO Gas Solenoid Valves With Flow Rate Adjustor ZEVR50


OPERATION AND INSTALLATIONTwo-way, normally-closed – energise to open. Rapid opening.Adjustable flow rate regulator on top of the coil. Mounting direct on pipeline more or less 90 degrees (max) from the vertical axis. TECHNICAL SPECIFICATION Opening time
BANICO Direct acting normally closed 1/4 to 1

BANICO Direct acting normally closed 1/4 to 1


Electrical Specifications:Closing time: 10 msec.Press-forged brass bodyInternal parts in stainless steel(17%CR)Gaskets in Viton(fluoroelastomer)Fluid temperature: -10 to +140℃With dc coil indicated pressure values must be reduced by 60%
BANICO Slow opening gas solenoid valves ZEVS15

BANICO Slow opening gas solenoid valves ZEVS15


OPERATION AND INSTALLATIONTwo-way, normally-closed – energise to open. Slow opening. Mounting direct on pipeline more or less 90 degrees (max) from the vertical axis. TECHNICAL SPECIFICATION Slow opening from 1 to 30 seconds, step pressure and flow regulation from top of the coil. Closing ti
BANICO Gas Solenoid Valves ZEV50

BANICO Gas Solenoid Valves ZEV50


OPERATION AND INSTALLATIONTwo-way, normally-closed – energise to open. Rapid opening. Mounting direct on pipeline more or less 90 degrees (max) from the vertical axis. TECHNICAL SPECIFICATION Opening time
BANICO Solenoid valves for steam and superheated water

BANICO Solenoid valves for steam and superheated water


SPECIFICATIONS> Closing time : 10 msec.> Press-forged brass body> Internal parts in stainless steel ( 17 % CR )> Gaskets in NBR ( buna N )> Diaphragm in fluorin-rubber> With dc coil indicated pressure values mustbe reduced by 60%INSTALLATION AND OPERATION> 2 way valve, normally-closed> Servo-assiste
BANICO Gas Solenoid Valves ZEV20

BANICO Gas Solenoid Valves ZEV20


OPERATION AND INSTALLATIONTwo-way, normally-closed – energise to open. Rapid opening. Mounting direct on pipeline more or less 90 degrees (max) from the vertical axis. TECHNICAL SPECIFICATION Opening time
BANICO Gas Solenoid Valves Manual Reset ZEVM20

BANICO Gas Solenoid Valves Manual Reset ZEVM20


OPERATION AND INSTALLATIONTwo-way, normally-closed – energise to open. Manual opening. Mounting direct on pipeline more or less 90 degrees (max) from the vertical axis. TECHNICAL SPECIFICATION Manual opening when electrically energized. Closing time
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 860 ms