Home > Products > BANICO Solenoid Valves > > BANICO Gas Solenoid Valves Manual Reset ZEVM20

BANICO Gas Solenoid Valves Manual Reset ZEVM20

OPERATION AND INSTALLATION
Two-way, normally-closed – energise to open.
Manual opening.
Mounting direct on pipeline more or less 90 degrees (max) from the vertical axis.
TECHNICAL SPECIFICATION
Manual opening when electrically energized.
Closing time <1 second.
1/4” Inlet and outlet plugs
Incorporated AISI 303 steel mesh filter.
Cable entry gland PG11 Live, Neutral, Earth.
Protection to IP54
NBR based seal with a strong resistance to hydrocarbons (UNI 4916-74).
Bodies and flanges in diecast aluminium.
AISI 302 steel pressure spring.
Chromate Fe 37 steel armature.
Ambient temperature -15°C to 60°C.
Coil temperature about 70°C
STANDARDS AND APPROVALS
Class A BS EN161:2002 Approved
British Gas & European Standards
90/396/EEC - 73/23/EEC
Certificate CE EC-87/07/009
ELECTRICAL SPECIFICATION
Supply voltage 230V (+10%-15%) 50-60Hz.
Coils to Class F, 360° rotation, suitable for permanent excitation.
BANICO Solenoid valves BANICO 30bar 2 way 1/4” Solenoid Valves Normally Closed

BANICO Solenoid valves BANICO 30bar 2 way 1/4” Solenoid Valves Normally Closed


SPECIFICATIONS:Type: 20B30Connection: 1/4” BSP femaleThrough bore: 3 mmSeal: VitonFlow Kv: 0.27 m3/h Min pressure: 0 barMax diff pressure: 16 barWorking temp: -10°C to 140°C
BANICO Solenoid valves suitable for Air Conditioning and Refrigeration

BANICO Solenoid valves suitable for Air Conditioning and Refrigeration


INSTALLATION AND OPERATION> Normally-closed 2 way valve> Direct acting> Energized coil opens the valveSPECIFICATIONS> Closing time : 10 msec.> Press-forged brass body> Internal parts in stainless steel ( 17 % CR )> Seal: Ruby> Fluid temperature : -40 to +180 C°
BANICO Normally Closed Valve Bodies Servo-Assited Diaphragm

BANICO Normally Closed Valve Bodies Servo-Assited Diaphragm


Solenoid valves suitable for large flow capacity, suitable for water,air, oil, inert gases and other fluids non-corrosive for copper alloys, with viscosity up to 2"Engler
BANICO Gas Solenoid Valves Manual Reset ZEVM20

BANICO Gas Solenoid Valves Manual Reset ZEVM20


OPERATION AND INSTALLATIONTwo-way, normally-closed – energise to open. Manual opening. Mounting direct on pipeline more or less 90 degrees (max) from the vertical axis. TECHNICAL SPECIFICATION Manual opening when electrically energized. Closing time
BANICO Gas Solenoid Valves ZEV15-110

BANICO Gas Solenoid Valves ZEV15-110


OPERATION AND INSTALLATIONTwo-way, normally-closed – energise to open. Rapid opening. Mounting direct on pipeline more or less 90 degrees (max) from the vertical axis. TECHNICAL SPECIFICATION Opening time
BANICO Gas Solenoid Valves ZEVF100

BANICO Gas Solenoid Valves ZEVF100


OPERATION AND INSTALLATIONTwo-way, normally-closed – energise to open. Rapid opening. Mounting direct on pipeline more or less 90 degrees (max) from the vertical axis. TECHNICAL SPECIFICATION Opening time
BANICO Gas Solenoid Valves ZEVF150

BANICO Gas Solenoid Valves ZEVF150


OPERATION AND INSTALLATIONTwo-way, normally-closed – energise to open. Rapid opening. Mounting direct on pipeline more or less 90 degrees (max) from the vertical axis. TECHNICAL SPECIFICATION Opening time
BANICO Slow opening gas solenoid valves ZEVS25

BANICO Slow opening gas solenoid valves ZEVS25


OPERATION AND INSTALLATIONTwo-way, normally-closed – energise to open. Slow opening. Mounting direct on pipeline more or less 90 degrees (max) from the vertical axis. TECHNICAL SPECIFICATION Slow opening from 1 to 30 seconds, step pressure and flow regulation from top of the coil. Closing ti
BANICO Solenoid valves BANICO 3/2 way ¼” Solenoid Valves Normally Closed

BANICO Solenoid valves BANICO 3/2 way ¼” Solenoid Valves Normally Closed


Used in applications which require actuation and automatic discharge in the followings: Sterilisers * Air compressors Espresso coffe machines * Pilot valves Diesel oil burners * Polyurethane plants Water treatment plantsSPECIFICATIONS:Type: 20B141Connection: 1/4” BSP femaleThrough bore
BANICO Gas Solenoid Valves With Flow Rate Adjustor ZEVR25

BANICO Gas Solenoid Valves With Flow Rate Adjustor ZEVR25


OPERATION AND INSTALLATIONTwo-way, normally-closed – energise to open. Rapid opening.Adjustable flow rate regulator on top of the coil. Mounting direct on pipeline more or less 90 degrees (max) from the vertical axis. TECHNICAL SPECIFICATION Opening time
BANICO Direct acting normally closed 1/4 to 1

BANICO Direct acting normally closed 1/4 to 1


Electrical Specifications:Closing time: 10 msec.Press-forged brass bodyInternal parts in stainless steel(17%CR)Gaskets in Viton(fluoroelastomer)Fluid temperature: -10 to +140℃With dc coil indicated pressure values must be reduced by 60%
BANICO Slow opening gas solenoid valves ZEVS15

BANICO Slow opening gas solenoid valves ZEVS15


OPERATION AND INSTALLATIONTwo-way, normally-closed – energise to open. Slow opening. Mounting direct on pipeline more or less 90 degrees (max) from the vertical axis. TECHNICAL SPECIFICATION Slow opening from 1 to 30 seconds, step pressure and flow regulation from top of the coil. Closing ti
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 938.9 ms