Home > Products > ASCO solenoid valve > 210 series > ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210D032 solenoid valve

ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210D032 solenoid valve

FEATURES
1. Two way shut-off valves for the control air, inert gas, water, oil and other
gases/liquids compatible with the sealing material used
2. Valves do not require a minimum operating pressure
3. All products are covered by Pressure Equipment Directive 97/23/EC and are
suitable for group 1 and 2 fl uids
4. The solenoid valves satisfy all relevant EC directives
GENERAL
Differential pressure [1 bar =100kPa]
Maximum viscosity 65 cSt (mm2/s)
Response time 15 - 120 ms
fluids (*)
temperature range (TS)
seal materials (*)

MATERIALS IN CONTACT WITH FLUID
Ensure that the compatibility of the fl uids in contact with the materials is verified
Brass body Stainless steelbody
Body Brass AISI 304 SS
Core tube Stainless steel Stainless steel
Core and plugnut Stainless steel Stainless steel
Springs Stainless steel Stainless steel
Seat Brass Stainless steel
Seals, diaphragm & disc NBR NBR
Disc holder (NO function) PA PA
Shading coil Copper Silver

ELECTRICAL CHARACTERISTICS
Coil insulation class F or H
Connector Spade plug (cable Ø 6-10 mm)
Connector specification ISO 4400 / EN 175301-803, form A
Electrical safety IEC 335
Electrical enclosure protection Moulded IP65 (EN 60529)
Standard voltages DC (=) : 24V - 48V
(Other voltages and 60 Hz on request) AC (~) : 24V - 48V - 115V - 230V / 50 Hz
ASCO direct operated for cryogenic service 1/8 to 3/8 SCE263209LT solenoid valve

ASCO direct operated for cryogenic service 1/8 to 3/8 SCE263209LT solenoid valve


FEATURES1. The solenoid valves will withstand the severe service encountered in controlling cryogenic fl uids, such as liquid oxygen (-183°C), liquid argon (-186°C) and liquid nitrogen (-196°C)2. All valves are degreased, cleaned, tested and packed to keep them free from moisture. In additi
ASCO WSNF8327B212 solenoid valve

ASCO WSNF8327B212 solenoid valve


FEATURES 1.Solenoid valves with explosionproof operators NF or WSNF type for use in poten-tially explosive atmospheres according to ATEX Directive 94/9/EC EC type examination certifi cate no.: LCIE 00 ATEX 6008 X IECEx Certifi cate of Conformity no.: IECEx LCI 07.0015X 2.Compliance with the Ess
ASCO SCE215A013 solenoid valve

ASCO SCE215A013 solenoid valve


FEATURES 1.The valves are for the control of low pressure air and gases, compatible with the seal materials used 2.Aluminium bodied valves designed to provide maximum flow 3. The valve have a resilient soft seating for tight shut-off 4. Valves do not require a minimum operating pressure 5.All
ASCO EFE215B080 solenoid valve

ASCO EFE215B080 solenoid valve


FEATURES 1.The valves are for the control of low pressure air and gases, compatible with the seal materials used 2.Aluminium bodied valves designed to provide maximum flow 3. The valve have a resilient soft seating for tight shut-off 4. Valves do not require a minimum operating pressure 5.All p
ASCO direct operated 1/4 E314K054S1N01FT solenoid valve

ASCO direct operated 1/4 E314K054S1N01FT solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.59 kg / 1.30 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 11/11/11 Bar - 160/160/160 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.22 K
ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210B156 solenoid valve

ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210B156 solenoid valve


General InformationOperator Type SolenoidProduct Weight 2.8 kg / 6.17 lbOperating Pressure RatingsMedia Type Air/Water/Lt OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 9/9/9 Bar - 131/131/131 PSI Technical InformationBody Material BrassCoil Class FFl
ASCO pilot operated built-in pilot,floating diaphragm 3/8 to 2 SCE238D001 solenoid valve

ASCO pilot operated built-in pilot,floating diaphragm 3/8 to 2 SCE238D001 solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.46 kg / 1.01 lbOperating Pressure RatingsMedia Type Air/WaterMin Operating Pressure 0.3/0.3 Bar - 4/4 PSIMax Operating Pressure 10/10 Bar - 145/145 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 2.4 Kv (m3/h) / 2
ASCO WSNF8327012 solenoid valve

ASCO WSNF8327012 solenoid valve


FEATURES 1.Solenoid valves with explosionproof operators NF or WSNF type for use in poten-tially explosive atmospheres according to ATEX Directive 94/9/EC EC type examination certifi cate no.: LCIE 00 ATEX 6008 X IECEx Certifi cate of Conformity no.: IECEx LCI 07.0015X 2.Compliance with the Ess
ASCO direct operated 1/4 E314K054S1N00F1 solenoid valve

ASCO direct operated 1/4 E314K054S1N00F1 solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.59 kg / 1.30 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 10/10/8 Bar - 145/145/116 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.22 Kv
ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210C013 solenoid valve

ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210C013 solenoid valve


FEATURES1. Two way shut-off valves for the control air, inert gas, water, oil and other gases/liquids compatible with the sealing material used2. Valves do not require a minimum operating pressure3. All products are covered by Pressure Equipment Directive 97/23/EC and aresuitable for group 1 and 2
ASCO WSNF8327A646 solenoid valve

ASCO WSNF8327A646 solenoid valve


FEATURES 1.Solenoid valves with explosionproof operators NF or WSNF type for use in poten-tially explosive atmospheres according to ATEX Directive 94/9/EC EC type examination certifi cate no.: LCIE 00 ATEX 6008 X IECEx Certifi cate of Conformity no.: IECEx LCI 07.0015X 2.Compliance with the Ess
ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCB210B030 solenoid valve

ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCB210B030 solenoid valve


FEATURES1. Two way shut-off valves for the control air, inert gas, water, oil and other gases/liquids compatible with the sealing material used2. Valves do not require a minimum operating pressure3. All products are covered by Pressure Equipment Directive 97/23/EC and aresuitable for group 1 and 2
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 1056 ms