Home > Products > ASCO solenoid valve > 263LT series > ASCO direct operated for cryogenic service 1/8 to 3/8 SCB263A240LT solenoid valve

ASCO direct operated for cryogenic service 1/8 to 3/8 SCB263A240LT solenoid valve

FEATURES
1. The solenoid valves will withstand the severe service encountered in controlling
cryogenic fl uids, such as liquid oxygen (-183°C), liquid argon (-186°C) and liquid
nitrogen (-196°C)
2. All valves are degreased, cleaned, tested and packed to keep them free from
moisture. In addition liquid oxygen (LOX) valves are “black light” tested to check
for any hydrocarbons
3.Valves do not require a minimum operating pressure
4. Valve are provided with stainless steel seats
5.The solenoid valves satisfy all relevant EC directives

GENERAL
Differential pressure [1 bar =100kPa]
Maximum viscosity 65 cSt (mm2/s)
Response time 5 - 25 ms
fluids cryogenic fluids
temperature range (TS) - 196°C to + 90°C
seal materials PTFE

MATERIALS IN CONTACT WITH FLUID
Ensure that the compatibility of the fl uids in contact with the materials is verified
Body Brass
Core tube Stainless steel
Core and plugnut Stainless steel
Springs Stainless steel
Seat Brass
Seals Lead-clad copper
Disc PTFE
Shading coil Copper

ELECTRICAL CHARACTERISTICS
Coil insulation class F
Connector Spade plug (cable Ø 6-10 mm)
Connector specifi cation ISO 4400 / EN 175301-803, form A
Electrical safety IEC 335
Electrical enclosure protection Moulded IP65 (EN 60529)
Standard voltages DC (=) : Contact us
(Other voltages and 60 Hz on request) AC (~) : 24V - 48V - 115V - 230V / 50 Hz
ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210D003 solenoid valve

ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210D003 solenoid valve


FEATURES1. Two way shut-off valves for the control air, inert gas, water, oil and other gases/liquids compatible with the sealing material used2. Valves do not require a minimum operating pressure3. All products are covered by Pressure Equipment Directive 97/23/EC and aresuitable for group 1 and 2
ASCO direct operated for high pressure fluids 1/8 - 1/4 E262K020S1N00H1 solenoid valve

ASCO direct operated for high pressure fluids 1/8 - 1/4 E262K020S1N00H1 solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.42 kg / 0.93 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 14/10/10 Bar - 203/145/145 PSI Technical InformationBody Material BrassCoil Class HFlow Factor 0.18 K
ASCO SCE215C073 solenoid valve

ASCO SCE215C073 solenoid valve


FEATURES 1.The valves are for the control of low pressure air and gases, compatible with the seal materials used 2.Aluminium bodied valves designed to provide maximum flow 3. The valve have a resilient soft seating for tight shut-off 4. Valves do not require a minimum operating pressure 5.All
ASCO direct operated for high pressure fluids 3/8 E263K200S1N01FT solenoid valve

ASCO direct operated for high pressure fluids 3/8 E263K200S1N01FT solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.63 kg / 1.39 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 14/12/6.5 Bar - 203/174/94 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.45 K
ASCO direct operated for high pressure fluids 3/8 E263K331S1N01F8 solenoid valve

ASCO direct operated for high pressure fluids 3/8 E263K331S1N01F8 solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.63 kg / 1.39 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 14/12/6.5 Bar - 203/174/94 PSI Technical InformationBody Material Stainless SteelCoil Class FFlow Fact
ASCO EFE215A090 solenoid valve

ASCO EFE215A090 solenoid valve


FEATURES 1.The valves are for the control of low pressure air and gases, compatible with the seal materials used 2.Aluminium bodied valves designed to provide maximum flow 3. The valve have a resilient soft seating for tight shut-off 4. Valves do not require a minimum operating pressure 5.All p
ASCO WSNF8327A650 solenoid valve

ASCO WSNF8327A650 solenoid valve


FEATURES 1.Solenoid valves with explosionproof operators NF or WSNF type for use in poten-tially explosive atmospheres according to ATEX Directive 94/9/EC EC type examination certifi cate no.: LCIE 00 ATEX 6008 X IECEx Certifi cate of Conformity no.: IECEx LCI 07.0015X 2.Compliance with the Ess
ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210D008 solenoid valve

ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210D008 solenoid valve


FEATURES1. Two way shut-off valves for the control air, inert gas, water, oil and other gases/liquids compatible with the sealing material used2. Valves do not require a minimum operating pressure3. All products are covered by Pressure Equipment Directive 97/23/EC and aresuitable for group 1 and 2
ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210C033 solenoid valve

ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210C033 solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.94609 kg / 2.09 lbOperating Pressure RatingsMedia Type Air/Water/Lt OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 9/9/9 Bar - 131/131/131 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 2.6
ASCO EFE215B050 solenoid valve

ASCO EFE215B050 solenoid valve


FEATURES 1.The valves are for the control of low pressure air and gases, compatible with the seal materials used 2.Aluminium bodied valves designed to provide maximum flow 3. The valve have a resilient soft seating for tight shut-off 4. Valves do not require a minimum operating pressure 5.All p
ASCO direct operated for high pressure fluids 3/8 E263K200S1N01F8 solenoid valve

ASCO direct operated for high pressure fluids 3/8 E263K200S1N01F8 solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.63 kg / 1.39 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 14/12/6.5 Bar - 203/174/94 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.45 K
ASCO direct operated for high pressure fluids 1/8 - 1/4 E262K023S1N00FL solenoid valve

ASCO direct operated for high pressure fluids 1/8 - 1/4 E262K023S1N00FL solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.42 kg / 0.93 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 18/17/10 Bar - 261/247/145 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.3 Kv
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 868.3 ms