Home > Products > ASCO solenoid valve > 327 series > ASCO WSNFET8327A608MS 24/DC solenoid valve

ASCO WSNFET8327A608MS 24/DC solenoid valve

FEATURES
1.Solenoid valves with explosionproof operators NF or WSNF type for use in poten-tially explosive atmospheres according to ATEX Directive 94/9/EC EC type examination certifi cate no.: LCIE 00 ATEX 6008 X IECEx Certifi cate of Conformity no.: IECEx LCI 07.0015X
2.Compliance with the Essential Health and Safety Requirements has been as-sured by compliance with the International and European Standards EN-IEC 60079-0, EN-IEC 60079-1 and EN-IEC 60079-31
3.The solenoid valves are recommended for pilot applications with high fl ow, wide pressure ranges and no minimum operating pressure
4. Special execution for low ambient and fl uid temperatures
5.Manual Operators are optional including an under pressure removable type
6.The valves are certifi ed according to IEC 61508 Functional Safety data and have
SIL-4 capatibility (TÃœV approval) and SIL-3 capability (EXIDA approval)

GENERAL
Differential pressure 0 - 10 bar [1 bar =100kPa]
Maximum viscosity 65 cSt (mm2/s)
Response time < 100 ms

MATERIALS IN CONTACT WITH FLUID
Ensure that the compatibility of the fl uids in contact with the materials is verifi ed
Body Brass or stainless steel AISI 316L
Stem, core tube Stainless steel
Core and plugnut Stainless steel
Springs Stainless steel
Seals & poppets  5,7 mm: FPM or VMQ or (F)VMQ 12 mm: NBR or FPM or (F)VMQ
Rider ring PTFE

OTHER MATERIALS
Solenoid enclosure NF: Chromated aluminium, epoxy coated
WSNF: Stainless steel (AISI 316L)
Bonnet, cover screws NF: Steel (zinc plated)
WSNF: Stainless steel
Core tube Stainless steel
Core and plugnut Stainless steel

ELECTRICAL CHARACTERISTICS SAFETY CODE
Coil insulation class H (5,7 mm), F (12 mm) IECEx / q II 2 G Ex d IIC T6..T4
Coil connection Screw terminals IECEx / q II 2 D Ex t IIIC Db IP67 T85°C..T135°C
Electrical safety IEC 335
Standard voltages DC (=) : 24V - 48V
(Other voltages and 60 Hz on request) AC (~) : 24V - 48V - 115V - 230V / 50 Hz
ASCO pilot operated built-in pilot,floating diaphragm 3/8 to 2 SCG238C017 solenoid valve

ASCO pilot operated built-in pilot,floating diaphragm 3/8 to 2 SCG238C017 solenoid valve


FEATURES1.Minimum operating pressure differential ∆P 0,3/0,5 bar2. Two way valves for automatic control of water, air and inert gas and other gases/liquids compatible with the sealing materials used3. Interchangeability of magnetic heads, AC and DC4. The solenoid valves satisfy all relevan
ASCO direct operated for high pressure fluids 1/8 - 1/4 E262K022S1V00FT solenoid valve

ASCO direct operated for high pressure fluids 1/8 - 1/4 E262K022S1V00FT solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.42 kg / 0.93 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 12/12/6 Bar - 174/174/87 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.3 Kv (
ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210B155 solenoid valve

ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210B155 solenoid valve


General InformationOperator Type SolenoidProduct Weight 2.1842 kg / 4.82 lbOperating Pressure RatingsMedia Type Air/Water/Lt OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 9/9/9 Bar - 131/131/131 PSI Technical InformationBody Material BrassCoil Class FFlo
ASCO direct operated for high pressure fluids 3/8 E263K195S1N01H1 solenoid valve

ASCO direct operated for high pressure fluids 3/8 E263K195S1N01H1 solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.63 kg / 1.39 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 2/2/2 Bar - 29/29/29 PSI Technical InformationBody Material Stainless SteelCoil Class HFlow Factor 0.
ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210D003 solenoid valve

ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210D003 solenoid valve


FEATURES1. Two way shut-off valves for the control air, inert gas, water, oil and other gases/liquids compatible with the sealing material used2. Valves do not require a minimum operating pressure3. All products are covered by Pressure Equipment Directive 97/23/EC and aresuitable for group 1 and 2
ASCO WSNF8327B302 solenoid valve

ASCO WSNF8327B302 solenoid valve


FEATURES 1.Solenoid valves with explosionproof operators NF or WSNF type for use in poten-tially explosive atmospheres according to ATEX Directive 94/9/EC EC type examination certifi cate no.: LCIE 00 ATEX 6008 X IECEx Certifi cate of Conformity no.: IECEx LCI 07.0015X 2.Compliance with the Ess
ASCO WSNF8327B001 solenoid valve

ASCO WSNF8327B001 solenoid valve


FEATURES 1.Solenoid valves with explosionproof operators NF or WSNF type for use in poten-tially explosive atmospheres according to ATEX Directive 94/9/EC EC type examination certifi cate no.: LCIE 00 ATEX 6008 X IECEx Certifi cate of Conformity no.: IECEx LCI 07.0015X 2.Compliance with the Ess
ASCO direct operated for high pressure fluids 3/8 E263K331S1N01FL solenoid valve

ASCO direct operated for high pressure fluids 3/8 E263K331S1N01FL solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.63 kg / 1.39 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 14/12/6.5 Bar - 203/174/94 PSI Technical InformationBody Material Stainless SteelCoil Class FFlow Fact
ASCO pilot operated built-in pilot,floating diaphragm 3/8 to 2 SCE238D010 solenoid valve

ASCO pilot operated built-in pilot,floating diaphragm 3/8 to 2 SCE238D010 solenoid valve


FEATURES1.Minimum operating pressure differential ∆P 0,3/0,5 bar2. Two way valves for automatic control of water, air and inert gas and other gases/liquids compatible with the sealing materials used3. Interchangeability of magnetic heads, AC and DC4. The solenoid valves satisfy all relevan
ASCO direct operated 1/4 E314K054S1N00FL solenoid valve

ASCO direct operated 1/4 E314K054S1N00FL solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.59 kg / 1.30 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 11/11/11 Bar - 160/160/160 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.22 K
ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210C013 solenoid valve

ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210C013 solenoid valve


FEATURES1. Two way shut-off valves for the control air, inert gas, water, oil and other gases/liquids compatible with the sealing material used2. Valves do not require a minimum operating pressure3. All products are covered by Pressure Equipment Directive 97/23/EC and aresuitable for group 1 and 2
ASCO WSNF8327A645 solenoid valve

ASCO WSNF8327A645 solenoid valve


FEATURES 1.Solenoid valves with explosionproof operators NF or WSNF type for use in poten-tially explosive atmospheres according to ATEX Directive 94/9/EC EC type examination certifi cate no.: LCIE 00 ATEX 6008 X IECEx Certifi cate of Conformity no.: IECEx LCI 07.0015X 2.Compliance with the Ess
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 1074.8 ms