Home > Products > ASCO solenoid valve > 215 series > ASCO SCE215C053 solenoid valve

ASCO SCE215C053 solenoid valve

FEATURES
1.The valves are for the control of low pressure air and gases, compatible with the
seal materials used
2.Aluminium bodied valves designed to provide maximum flow
3. The valve have a resilient soft seating for tight shut-off
4. Valves do not require a minimum operating pressure
5.All products are covered by Pressure Equipment Directive 97/23/EC and aresuitable for group 1 and 2 fluids
6.The solenoid valves satisfy all relevant EC directives

GENERAL
Differential pressure [1 bar =100kPa]
Response time 25 - 120 ms
fluids air, fuel gas
temperature range (TS) NC: inert gas
seal materials - 20°C to + 85°C NBR (nitrile)
NC: inert gas

MATERIALS IN CONTACT WITH FLUID
Ensure that the compatibility of the fl uids in contact with the materials is verified
Body Aluminium
Core tube Stainless steel
Core and plugnut Stainless steel
Springs Stainless steel
Seat Aluminium or stainless steel
Seals, diaphragms & discs NBR
Core guide POM
Disc holder (NO function) PA
Rider rings PTFE
Shading coil Copper

ELECTRICAL CHARACTERISTICS
Coil insulation class F
Connector Spade plug (cable ˜ 6-10 mm) or cable leads, 0,35 m length (EF)
Connector specification ISO 4400 / EN 175301-803, form A
Electrical safety IEC 335
Electrical enclosure protection Moulded IP65 (EN 60529) or NEMA 3, 7, 9 (EF)
Standard voltages DC (=) : 24V - 48V
(Other voltages and 60 Hz on request) AC (~) : 24V - 48V - 115V - 230V / 50 Hz
ASCO SCE215C010 solenoid valve

ASCO SCE215C010 solenoid valve


FEATURES 1.The valves are for the control of low pressure air and gases, compatible with the seal materials used 2.Aluminium bodied valves designed to provide maximum flow 3. The valve have a resilient soft seating for tight shut-off 4. Valves do not require a minimum operating pressure 5.All p
ASCO direct operated for high pressure fluids 3/8 E263K331S1N01H1 solenoid valve

ASCO direct operated for high pressure fluids 3/8 E263K331S1N01H1 solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.63 kg / 1.39 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 3.5/3.5/3 Bar - 51/51/44 PSI Technical InformationBody Material Stainless SteelCoil Class HFlow Factor
ASCO direct operated for high pressure fluids 1/8 - 1/4 E262K023S1N00FL solenoid valve

ASCO direct operated for high pressure fluids 1/8 - 1/4 E262K023S1N00FL solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.42 kg / 0.93 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 18/17/10 Bar - 261/247/145 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.3 Kv
ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210D002 230/50 solenoid valve

ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210D002 230/50 solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.74 kg / 1.63 lbOperating Pressure RatingsMedia Type Air/Water/Lt OilMin Operating Pressure 0.35/0.35/0.35 Bar - 5/5/5 PSIMax Operating Pressure 14/10/10 Bar - 203/145/145 PSI Technical InformationBody Material BrassCoil Class FFlow Fa
ASCO WSNF8327A610 solenoid valve

ASCO WSNF8327A610 solenoid valve


FEATURES 1.Solenoid valves with explosionproof operators NF or WSNF type for use in poten-tially explosive atmospheres according to ATEX Directive 94/9/EC EC type examination certifi cate no.: LCIE 00 ATEX 6008 X IECEx Certifi cate of Conformity no.: IECEx LCI 07.0015X 2.Compliance with the Ess
ASCO direct operated for high pressure fluids 1/8 - 1/4 E262K022S1V00H9 solenoid valve

ASCO direct operated for high pressure fluids 1/8 - 1/4 E262K022S1V00H9 solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.42 kg / 0.93 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 8/6.5/5.5 Bar - 116/94/80 PSI Technical InformationBody Material BrassCoil Class HFlow Factor 0.3 Kv
ASCO direct operated 1/4 E314K054S1N00FT solenoid valve

ASCO direct operated 1/4 E314K054S1N00FT solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.59 kg / 1.30 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 11/11/11 Bar - 160/160/160 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.22 K
ASCO SCE215B050 solenoid valve

ASCO SCE215B050 solenoid valve


FEATURES 1.The valves are for the control of low pressure air and gases, compatible with the seal materials used 2.Aluminium bodied valves designed to provide maximum flow 3. The valve have a resilient soft seating for tight shut-off 4. Valves do not require a minimum operating pressure 5.All p
ASCO direct operated 1/4 E314K035S1N01FT solenoid valve

ASCO direct operated 1/4 E314K035S1N01FT solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.59 kg / 1.30 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 14/14/13 Bar - 203/203/189 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.13 K
ASCO WSNF8327A608 solenoid valve

ASCO WSNF8327A608 solenoid valve


FEATURES 1.Solenoid valves with explosionproof operators NF or WSNF type for use in poten-tially explosive atmospheres according to ATEX Directive 94/9/EC EC type examination certifi cate no.: LCIE 00 ATEX 6008 X IECEx Certifi cate of Conformity no.: IECEx LCI 07.0015X 2.Compliance with the Ess
ASCO EFE215B093 solenoid valve

ASCO EFE215B093 solenoid valve


FEATURES 1.The valves are for the control of low pressure air and gases, compatible with the seal materials used 2.Aluminium bodied valves designed to provide maximum flow 3. The valve have a resilient soft seating for tight shut-off 4. Valves do not require a minimum operating pressure 5.All p
ASCO direct operated 1/4 E314K008S1V00F8 solenoid valve

ASCO direct operated 1/4 E314K008S1V00F8 solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.76 kg / 1.68 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 4.5/4.5/2.5 Bar - 65/65/36 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.22 K
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 988.3 ms