Home > Products > ASCO solenoid valve > 215 series > ASCO SCE215B060 solenoid valve

ASCO SCE215B060 solenoid valve

share
FEATURES
1.The valves are for the control of low pressure air and gases, compatible with the seal materials used
2.Aluminium bodied valves designed to provide maximum flow
3. The valve have a resilient soft seating for tight shut-off
4. Valves do not require a minimum operating pressure
5.All products are covered by Pressure Equipment Directive 97/23/EC and aresuitable for group 1 and 2 fluids
6.The solenoid valves satisfy all relevant EC directives

GENERAL
Differential pressure [1 bar =100kPa]
Response time 25 - 120 ms
fluids air, fuel gas
temperature range (TS) NC: inert gas
seal materials - 20°C to + 85°C NBR (nitrile)
NC: inert gas

MATERIALS IN CONTACT WITH FLUID
Ensure that the compatibility of the fl uids in contact with the materials is verified
Body Aluminium
Core tube Stainless steel
Core and plugnut Stainless steel
Springs Stainless steel
Seat Aluminium or stainless steel
Seals, diaphragms & discs NBR
Core guide POM
Disc holder (NO function) PA
Rider rings PTFE
Shading coil Copper

ELECTRICAL CHARACTERISTICS
Coil insulation class F
Connector Spade plug (cable  6-10 mm) or cable leads, 0,35 m length (EF)
Connector specification ISO 4400 / EN 175301-803, form A
Electrical safety IEC 335
Electrical enclosure protection Moulded IP65 (EN 60529) or NEMA 3, 7, 9 (EF)
Standard voltages DC (=) : 24V - 48V
(Other voltages and 60 Hz on request) AC (~) : 24V - 48V - 115V - 230V / 50 Hz
ASCO direct operated for high pressure fluids 1/8 - 1/4 E262K020S1N00FT solenoid valve

ASCO direct operated for high pressure fluids 1/8 - 1/4 E262K020S1N00FT solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.42 kg / 0.93 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 25/22/11 Bar - 363/319/160 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.18 K
ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCB210B038 solenoid valve

ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCB210B038 solenoid valve


FEATURES1. Two way shut-off valves for the control air, inert gas, water, oil and other gases/liquids compatible with the sealing material used2. Valves do not require a minimum operating pressure3. All products are covered by Pressure Equipment Directive 97/23/EC and aresuitable for group 1 and 2
ASCO direct operated 1/4 E314K054S1N01F1 solenoid valve

ASCO direct operated 1/4 E314K054S1N01F1 solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.59 kg / 1.30 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 10/10/8 Bar - 145/145/116 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.22 Kv
ASCO SCE215A013 solenoid valve

ASCO SCE215A013 solenoid valve


FEATURES 1.The valves are for the control of low pressure air and gases, compatible with the seal materials used 2.Aluminium bodied valves designed to provide maximum flow 3. The valve have a resilient soft seating for tight shut-off 4. Valves do not require a minimum operating pressure 5.All
ASCO SCE215B050 solenoid valve

ASCO SCE215B050 solenoid valve


FEATURES 1.The valves are for the control of low pressure air and gases, compatible with the seal materials used 2.Aluminium bodied valves designed to provide maximum flow 3. The valve have a resilient soft seating for tight shut-off 4. Valves do not require a minimum operating pressure 5.All p
ASCO direct operated 1/4 E314K008S1V00F1 solenoid valve

ASCO direct operated 1/4 E314K008S1V00F1 solenoid valve


General Information Operator Type Solenoid Product Weight 0.76 kg / 1.68 lb Operating Pressure Ratings Media Type Air/Water/Oil Min Operating Pressure 0/0/0 Bar - 0/0/0 PSI Max Operating Pressure 3.5/3/3 Bar - 51/44/44 PSI Technical Information Body Material Brass Coil Class F F
ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210D002 115/50 solenoid valve

ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210D002 115/50 solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.74275 kg / 1.64 lbOperating Pressure RatingsMedia Type Air/Water/Lt OilMin Operating Pressure 0.35/0.35/0.35 Bar - 5/5/5 PSIMax Operating Pressure 14/10/10 Bar - 203/145/145 PSI Technical InformationBody Material BrassCoil Class FFlow
ASCO direct operated 1/8 - 1/4 SCXG356A466VMS solenoid valve

ASCO direct operated 1/8 - 1/4 SCXG356A466VMS solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.172 kg / 0.38 lbOperating Pressure RatingsMedia Type Air/Water/Lt OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 10/10/10 Bar - 145/145/145 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.
ASCO EFE215C063 solenoid valve

ASCO EFE215C063 solenoid valve


FEATURES 1.The valves are for the control of low pressure air and gases, compatible with the seal materials used 2.Aluminium bodied valves designed to provide maximum flow 3. The valve have a resilient soft seating for tight shut-off 4. Valves do not require a minimum operating pressure 5.All p
ASCO WSNF8327012 solenoid valve

ASCO WSNF8327012 solenoid valve


FEATURES 1.Solenoid valves with explosionproof operators NF or WSNF type for use in poten-tially explosive atmospheres according to ATEX Directive 94/9/EC EC type examination certifi cate no.: LCIE 00 ATEX 6008 X IECEx Certifi cate of Conformity no.: IECEx LCI 07.0015X 2.Compliance with the Ess
ASCO WSNF8327B011 solenoid valve

ASCO WSNF8327B011 solenoid valve


FEATURES 1.Solenoid valves with explosionproof operators NF or WSNF type for use in poten-tially explosive atmospheres according to ATEX Directive 94/9/EC EC type examination certifi cate no.: LCIE 00 ATEX 6008 X IECEx Certifi cate of Conformity no.: IECEx LCI 07.0015X 2.Compliance with the Ess
ASCO WSNF8327A649 solenoid valve

ASCO WSNF8327A649 solenoid valve


FEATURES 1.Solenoid valves with explosionproof operators NF or WSNF type for use in poten-tially explosive atmospheres according to ATEX Directive 94/9/EC EC type examination certifi cate no.: LCIE 00 ATEX 6008 X IECEx Certifi cate of Conformity no.: IECEx LCI 07.0015X 2.Compliance with the Ess
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 641.8 ms