Home > Products > ASCO solenoid valve > 215 series > ASCO SCE215A023 solenoid valve

ASCO SCE215A023 solenoid valve

FEATURES
1.The valves are for the control of low pressure air and gases, compatible with the
seal materials used
2.Aluminium bodied valves designed to provide maximum fl ow
3. The valve have a resilient soft seating for tight shut-off
4. Valves do not require a minimum operating pressure
5.All products are covered by Pressure Equipment Directive 97/23/EC and aresuitable for group 1 and 2 fluids
6.The solenoid valves satisfy all relevant EC directives

GENERAL
Differential pressure [1 bar =100kPa]
Response time 25 - 120 ms
fluids air, fuel gas
temperature range (TS) NC: inert gas
seal materials - 20°C to + 85°C NBR (nitrile)
NC: inert gas

MATERIALS IN CONTACT WITH FLUID
Ensure that the compatibility of the fluids in contact with the materials is verified
Body Aluminium
Core tube Stainless steel
Core and plugnut Stainless steel
Springs Stainless steel
Seat Aluminium or stainless steel
Seals, diaphragms & discs NBR
Core guide POM
Disc holder (NO function) PA
Rider rings PTFE
Shading coil Copper

ELECTRICAL CHARACTERISTICS
Coil insulation class F
Connector Spade plug (cable  6-10 mm) or cable leads, 0,35 m length (EF)
Connector specification ISO 4400 / EN 175301-803, form A
Electrical safety IEC 335
Electrical enclosure protection Moulded IP65 (EN 60529) or NEMA 3, 7, 9 (EF)
Standard voltages DC (=) : 24V - 48V
(Other voltages and 60 Hz on request) AC (~) : 24V - 48V - 115V - 230V / 50 Hz
ASCO EFE215B080 solenoid valve

ASCO EFE215B080 solenoid valve


FEATURES 1.The valves are for the control of low pressure air and gases, compatible with the seal materials used 2.Aluminium bodied valves designed to provide maximum flow 3. The valve have a resilient soft seating for tight shut-off 4. Valves do not require a minimum operating pressure 5.All p
ASCO EFE215C083 solenoid valve

ASCO EFE215C083 solenoid valve


FEATURES 1.The valves are for the control of low pressure air and gases, compatible with the seal materials used 2.Aluminium bodied valves designed to provide maximum fl ow 3. The valve have a resilient soft seating for tight shut-off 4. Valves do not require a minimum operating pressure 5.Al
ASCO direct operated 1/4 E314K054S1N00FR solenoid valve

ASCO direct operated 1/4 E314K054S1N00FR solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.59 kg / 1.30 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 11/11/11 Bar - 160/160/160 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.22 K
ASCO WSNF8327B011 solenoid valve

ASCO WSNF8327B011 solenoid valve


FEATURES 1.Solenoid valves with explosionproof operators NF or WSNF type for use in poten-tially explosive atmospheres according to ATEX Directive 94/9/EC EC type examination certifi cate no.: LCIE 00 ATEX 6008 X IECEx Certifi cate of Conformity no.: IECEx LCI 07.0015X 2.Compliance with the Ess
ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210B154 solenoid valve

ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210B154 solenoid valve


FEATURES1. Two way shut-off valves for the control air, inert gas, water, oil and other gases/liquids compatible with the sealing material used2. Valves do not require a minimum operating pressure3. All products are covered by Pressure Equipment Directive 97/23/EC and aresuitable for group 1 and 2
ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210C035 solenoid valve

ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210C035 solenoid valve


FEATURES1. Two way shut-off valves for the control air, inert gas, water, oil and other gases/liquids compatible with the sealing material used2. Valves do not require a minimum operating pressure3. All products are covered by Pressure Equipment Directive 97/23/EC and aresuitable for group 1 and 2
ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210D004 solenoid valve

ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210D004 solenoid valve


General InformationOperator Type SolenoidProduct Weight 1.99731 kg / 4.40 lbOperating Pressure RatingsMedia Type Air/Water/Lt OilMin Operating Pressure 0.35/0.35/0.35 Bar - 5/5/5 PSIMax Operating Pressure 9/9/9 Bar - 131/131/131 PSI Technical InformationBody Material BrassCoil Class FFlow Fa
ASCO direct operated 1/8 - 1/4 SCXG356A470VMS solenoid valve

ASCO direct operated 1/8 - 1/4 SCXG356A470VMS solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.26 kg / 0.57 lbOperating Pressure RatingsMedia Type Air/Water/Lt OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 4/4/4 Bar - 58/58/58 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.05 Kv (
ASCO direct operated for high pressure fluids 1/8 - 1/4 E262K020S1N00FL solenoid valve

ASCO direct operated for high pressure fluids 1/8 - 1/4 E262K020S1N00FL solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.42 kg / 0.93 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 25/22/11 Bar - 363/319/160 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.18 K
ASCO direct operated for high pressure fluids 3/8 E263K331S1N01FT solenoid valve

ASCO direct operated for high pressure fluids 3/8 E263K331S1N01FT solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.63 kg / 1.39 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 14/12/6.5 Bar - 203/174/94 PSI Technical InformationBody Material Stainless SteelCoil Class FFlow Fact
ASCO direct operated for cryogenic service 1/8 to 3/8 SCE263B206LT solenoid valve

ASCO direct operated for cryogenic service 1/8 to 3/8 SCE263B206LT solenoid valve


FEATURES1. The solenoid valves will withstand the severe service encountered in controlling cryogenic fl uids, such as liquid oxygen (-183°C), liquid argon (-186°C) and liquid nitrogen (-196°C)2. All valves are degreased, cleaned, tested and packed to keep them free from moisture. In additi
ASCO direct operated for cryogenic service 1/8 to 3/8 SCE263209LT solenoid valve

ASCO direct operated for cryogenic service 1/8 to 3/8 SCE263209LT solenoid valve


FEATURES1. The solenoid valves will withstand the severe service encountered in controlling cryogenic fl uids, such as liquid oxygen (-183°C), liquid argon (-186°C) and liquid nitrogen (-196°C)2. All valves are degreased, cleaned, tested and packed to keep them free from moisture. In additi
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 880.1 ms