Home > Products > ASCO solenoid valve > 215 series > ASCO EFE215B093 solenoid valve

ASCO EFE215B093 solenoid valve

FEATURES
1.The valves are for the control of low pressure air and gases, compatible with the seal materials used
2.Aluminium bodied valves designed to provide maximum flow
3. The valve have a resilient soft seating for tight shut-off
4. Valves do not require a minimum operating pressure
5.All products are covered by Pressure Equipment Directive 97/23/EC and aresuitable for group 1 and 2 fl uids
6.The solenoid valves satisfy all relevant EC directives

GENERAL
Differential pressure [1 bar =100kPa]
Response time 25 - 120 ms
fluids air, fuel gas
temperature range (TS) NC: inert gas seal materials - 20°C to + 85°C NBR (nitrile)
NC: inert gas

MATERIALS IN CONTACT WITH FLUID
Ensure that the compatibility of the fluids in contact with the materials is verified
Body Aluminium
Core tube Stainless steel
Core and plugnut Stainless steel
Springs Stainless steel
Seat Aluminium or stainless steel
Seals, diaphragms & discs NBR
Core guide POM
Disc holder (NO function) PA
Rider rings PTFE
Shading coil Copper

ELECTRICAL CHARACTERISTICS
Coil insulation class F
Connector Spade plug (cable ˜ 6-10 mm) or cable leads, 0,35 m length (EF)
Connector specification ISO 4400 / EN 175301-803, form A
Electrical safety IEC 335
Electrical enclosure protection Moulded IP65 (EN 60529) or NEMA 3, 7, 9 (EF)
Standard voltages DC (=) : 24V - 48V
(Other voltages and 60 Hz on request) AC (~) : 24V - 48V - 115V - 230V / 50 Hz
ASCO direct operated for cryogenic service 1/8 to 3/8 SCE263B206LT solenoid valve

ASCO direct operated for cryogenic service 1/8 to 3/8 SCE263B206LT solenoid valve


FEATURES1. The solenoid valves will withstand the severe service encountered in controlling cryogenic fl uids, such as liquid oxygen (-183°C), liquid argon (-186°C) and liquid nitrogen (-196°C)2. All valves are degreased, cleaned, tested and packed to keep them free from moisture. In additi
ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210C034 solenoid valve

ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210C034 solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.89519 kg / 1.97 lbOperating Pressure RatingsMedia Type Air/Water/Lt OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 9/9/9 Bar - 131/131/131 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 3.4
ASCO direct operated 1/4 E314K054S1N00FL solenoid valve

ASCO direct operated 1/4 E314K054S1N00FL solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.59 kg / 1.30 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 11/11/11 Bar - 160/160/160 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.22 K
ASCO direct operated 1/8 - 1/4 SCXG356A001VMS solenoid valve

ASCO direct operated 1/8 - 1/4 SCXG356A001VMS solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.176 kg / 0.39 lbOperating Pressure RatingsMedia Type Air/Water/Lt OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 15/15/15 Bar - 218/218/218 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.
ASCO direct operated for cryogenic service 1/8 to 3/8 SCE263A210LT solenoid valve

ASCO direct operated for cryogenic service 1/8 to 3/8 SCE263A210LT solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.54843 kg / 1.21 lbOperating Pressure RatingsMedia Type Cryogenic fluidsMin Operating Pressure 0 Bar - 0 PSIMax Operating Pressure 3 Bar - 44 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.6 Kv (m3/h) / 0.52 CvM
ASCO direct operated 1/4 E314K035S1N00F8 solenoid valve

ASCO direct operated 1/4 E314K035S1N00F8 solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.59 kg / 1.30 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 14/14/13 Bar - 203/203/189 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.13 K
ASCO direct operated for high pressure fluids 1/8 - 1/4 E262K023S1N00FR solenoid valve

ASCO direct operated for high pressure fluids 1/8 - 1/4 E262K023S1N00FR solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.42 kg / 0.93 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 18/17/10 Bar - 261/247/145 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.3 Kv
ASCO SCE215C063 solenoid valve

ASCO SCE215C063 solenoid valve


FEATURES 1.The valves are for the control of low pressure air and gases, compatible with the seal materials used 2.Aluminium bodied valves designed to provide maximum flow 3. The valve have a resilient soft seating for tight shut-off 4. Valves do not require a minimum operating pressure 5.All
ASCO direct operated for high pressure fluids 1/8 - 1/4 E262K023S1N00FT solenoid valve

ASCO direct operated for high pressure fluids 1/8 - 1/4 E262K023S1N00FT solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.42 kg / 0.93 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 18/17/10 Bar - 261/247/145 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.3 Kv
ASCO SCE215A033 solenoid valve

ASCO SCE215A033 solenoid valve


FEATURES 1.The valves are for the control of low pressure air and gases, compatible with the seal materials used 2.Aluminium bodied valves designed to provide maximum fl ow 3. The valve have a resilient soft seating for tight shut-off 4. Valves do not require a minimum operating pressure 5.All
ASCO direct operated 1/8 - 1/4 SCXG256A404VMS solenoid valve

ASCO direct operated 1/8 - 1/4 SCXG256A404VMS solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.2 kg / 0.44 lbOperating Pressure RatingsMedia Type Air/Water/Lt OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 12/12/12 Bar - 174/174/174 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.16
ASCO direct operated for high pressure fluids 1/8 - 1/4 E262K022S1N00H9 solenoid valve

ASCO direct operated for high pressure fluids 1/8 - 1/4 E262K022S1N00H9 solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.42 kg / 0.93 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 8/6.5/5.5 Bar - 116/94/80 PSI Technical InformationBody Material BrassCoil Class HFlow Factor 0.3 Kv
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 1014.8 ms