Home > Products > ASCO solenoid valve > 215 series > ASCO EFE215B050 solenoid valve

ASCO EFE215B050 solenoid valve

FEATURES
1.The valves are for the control of low pressure air and gases, compatible with the seal materials used
2.Aluminium bodied valves designed to provide maximum flow
3. The valve have a resilient soft seating for tight shut-off
4. Valves do not require a minimum operating pressure
5.All products are covered by Pressure Equipment Directive 97/23/EC and aresuitable for group 1 and 2 fluids
6.The solenoid valves satisfy all relevant EC directives

GENERAL
Differential pressure [1 bar =100kPa]
Response time 25 - 120 ms
fluids air, fuel gas
temperature range (TS) NC: inert gas
seal materials - 20°C to + 85°C NBR (nitrile)
NC: inert gas

MATERIALS IN CONTACT WITH FLUID
Ensure that the compatibility of the fl uids in contact with the materials is verified
Body Aluminium
Core tube Stainless steel
Core and plugnut Stainless steel
Springs Stainless steel
Seat Aluminium or stainless steel
Seals, diaphragms & discs NBR
Core guide POM
Disc holder (NO function) PA
Rider rings PTFE
Shading coil Copper

ELECTRICAL CHARACTERISTICS
Coil insulation class F
Connector Spade plug (cable 6-10 mm) or cable leads, 0,35 m length (EF)
Connector specification ISO 4400 / EN 175301-803, form A
Electrical safety IEC 335
Electrical enclosure protection Moulded IP65 (EN 60529) or NEMA 3, 7, 9 (EF)
Standard voltages DC (=) : 24V - 48V
(Other voltages and 60 Hz on request) AC (~) : 24V - 48V - 115V - 230V / 50 Hz
ASCO direct operated for cryogenic service 1/8 to 3/8 SCE263A210LT solenoid valve

ASCO direct operated for cryogenic service 1/8 to 3/8 SCE263A210LT solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.54843 kg / 1.21 lbOperating Pressure RatingsMedia Type Cryogenic fluidsMin Operating Pressure 0 Bar - 0 PSIMax Operating Pressure 3 Bar - 44 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.6 Kv (m3/h) / 0.52 CvM
ASCO SCE215A033 solenoid valve

ASCO SCE215A033 solenoid valve


FEATURES 1.The valves are for the control of low pressure air and gases, compatible with the seal materials used 2.Aluminium bodied valves designed to provide maximum fl ow 3. The valve have a resilient soft seating for tight shut-off 4. Valves do not require a minimum operating pressure 5.All
ASCO direct operated for high pressure fluids 3/8 E263K331S1N01FL solenoid valve

ASCO direct operated for high pressure fluids 3/8 E263K331S1N01FL solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.63 kg / 1.39 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 14/12/6.5 Bar - 203/174/94 PSI Technical InformationBody Material Stainless SteelCoil Class FFlow Fact
ASCO direct operated 1/4 E314K054S1N01F1 solenoid valve

ASCO direct operated 1/4 E314K054S1N01F1 solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.59 kg / 1.30 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 10/10/8 Bar - 145/145/116 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 0.22 Kv
ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210C034 solenoid valve

ASCO pilot operated hung diaphragm 3/8 to 1 1/2 SCE210C034 solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.89519 kg / 1.97 lbOperating Pressure RatingsMedia Type Air/Water/Lt OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 9/9/9 Bar - 131/131/131 PSI Technical InformationBody Material BrassCoil Class FFlow Factor 3.4
ASCO direct operated for high pressure fluids 3/8 E263K331S1N01H1 solenoid valve

ASCO direct operated for high pressure fluids 3/8 E263K331S1N01H1 solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.63 kg / 1.39 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 3.5/3.5/3 Bar - 51/51/44 PSI Technical InformationBody Material Stainless SteelCoil Class HFlow Factor
ASCO SCE215C063 solenoid valve

ASCO SCE215C063 solenoid valve


FEATURES 1.The valves are for the control of low pressure air and gases, compatible with the seal materials used 2.Aluminium bodied valves designed to provide maximum flow 3. The valve have a resilient soft seating for tight shut-off 4. Valves do not require a minimum operating pressure 5.All
ASCO direct operated for high pressure fluids 1/8 - 1/4 E262K022S1N00H9 solenoid valve

ASCO direct operated for high pressure fluids 1/8 - 1/4 E262K022S1N00H9 solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.42 kg / 0.93 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 8/6.5/5.5 Bar - 116/94/80 PSI Technical InformationBody Material BrassCoil Class HFlow Factor 0.3 Kv
ASCO EFE215B093 solenoid valve

ASCO EFE215B093 solenoid valve


FEATURES 1.The valves are for the control of low pressure air and gases, compatible with the seal materials used 2.Aluminium bodied valves designed to provide maximum flow 3. The valve have a resilient soft seating for tight shut-off 4. Valves do not require a minimum operating pressure 5.All p
ASCO SCE215C073 solenoid valve

ASCO SCE215C073 solenoid valve


FEATURES 1.The valves are for the control of low pressure air and gases, compatible with the seal materials used 2.Aluminium bodied valves designed to provide maximum flow 3. The valve have a resilient soft seating for tight shut-off 4. Valves do not require a minimum operating pressure 5.All
ASCO WSNF8327B302 solenoid valve

ASCO WSNF8327B302 solenoid valve


FEATURES 1.Solenoid valves with explosionproof operators NF or WSNF type for use in poten-tially explosive atmospheres according to ATEX Directive 94/9/EC EC type examination certifi cate no.: LCIE 00 ATEX 6008 X IECEx Certifi cate of Conformity no.: IECEx LCI 07.0015X 2.Compliance with the Ess
ASCO direct operated 1/4 E314K068S1V00F8 solenoid valve

ASCO direct operated 1/4 E314K068S1V00F8 solenoid valve


General InformationOperator Type SolenoidProduct Weight 0.76 kg / 1.68 lbOperating Pressure RatingsMedia Type Air/Water/OilMin Operating Pressure 0/0/0 Bar - 0/0/0 PSIMax Operating Pressure 20/20/20 Bar - 290/290/290 PSI Technical InformationBody Material Stainless SteelCoil Class FFlow Fact
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 950.4 ms