Home > Products > B
BANICO Gas Solenoid Valves ZEVF100
BANICO Gas Solenoid Valves ZEVF100
OPERATION AND INSTALLATIONTwo-way, normally-closed – energise to open. Rapid opening. Mounting direct on pipeline more or less 90 degrees (max) from the vertical axis. TECHNICAL SPECIFICATION Opening time
BANICO Gas Solenoid Valves ZEV50
BANICO Gas Solenoid Valves ZEV50
OPERATION AND INSTALLATIONTwo-way, normally-closed – energise to open. Rapid opening. Mounting direct on pipeline more or less 90 degrees (max) from the vertical axis. TECHNICAL SPECIFICATION Opening time
BANICO Solenoid valves BANICO 30bar 2 way 1/4” Solenoid Valves Normally Closed
BANICO Solenoid valves BANICO 30bar 2 way 1/4” Solenoid Valves Normally Closed
SPECIFICATIONS:Type: 20B30Connection: 1/4” BSP femaleThrough bore: 3 mmSeal: VitonFlow Kv: 0.27 m3/h Min pressure: 0 barMax diff pressure: 16 barWorking temp: -10°C to 140°C
BANICO Solenoid valves BANICO 3/2 way ¼” Solenoid Valves Normally Closed
BANICO Solenoid valves BANICO 3/2 way ¼” Solenoid Valves Normally Closed
Used in applications which require actuation and automatic discharge in the followings: Sterilisers * Air compressors Espresso coffe machines * Pilot valves Diesel oil burners * Polyurethane plants Water treatment plantsSPECIFICATIONS:Type: 20B141Connection: 1/4” BSP femaleThrough bore
BANICO Solenoid valves suitable for Air Conditioning and Refrigeration
BANICO Solenoid valves suitable for Air Conditioning and Refrigeration
INSTALLATION AND OPERATION> Normally-closed 2 way valve> Direct acting> Energized coil opens the valveSPECIFICATIONS> Closing time : 10 msec.> Press-forged brass body> Internal parts in stainless steel ( 17 % CR )> Seal: Ruby> Fluid temperature : -40 to +180 C°
BANICO Solenoid valves  NORMALLY OPEN VALVE BODIES
BANICO Solenoid valves NORMALLY OPEN VALVE BODIES
Suitable for large flow capacity, suitable for water, air, oil, inert gases and other fluids which are non-corrosive for copper alloys, with viscosity up to 2° Engler INSTALLATION AND OPERATION> 2 way valve normally-open> Servo-assisted membrane actuator> Female end connections, size G3/8" to 2"
BANICO Solenoid valves for steam and superheated water
BANICO Solenoid valves for steam and superheated water
SPECIFICATIONS> Closing time : 10 msec.> Press-forged brass body> Internal parts in stainless steel ( 17 % CR )> Gaskets in NBR ( buna N )> Diaphragm in fluorin-rubber> With dc coil indicated pressure values mustbe reduced by 60%INSTALLATION AND OPERATION> 2 way valve, normally-closed> Servo-assiste
BANICO Normally Closed Valve Bodies Servo-Assited Diaphragm
BANICO Normally Closed Valve Bodies Servo-Assited Diaphragm
Solenoid valves suitable for large flow capacity, suitable for water,air, oil, inert gases and other fluids non-corrosive for copper alloys, with viscosity up to 2"Engler
BANICO Direct acting normally closed 1/4 to 1
BANICO Direct acting normally closed 1/4 to 1
Electrical Specifications:Closing time: 10 msec.Press-forged brass bodyInternal parts in stainless steel(17%CR)Gaskets in Viton(fluoroelastomer)Fluid temperature: -10 to +140℃With dc coil indicated pressure values must be reduced by 60%
Buschjost 8570400940102400 Solenoid Actuated with Forced Lift Piston Seat Valve
Buschjost 8570400940102400 Solenoid Actuated with Forced Lift Piston Seat Valve
FeaturePart number:8570400940102400Actuation: 2/2 Orifice (mm): 25Port size:G1Kv value (m3h):10.5Operating pressure (bar):0-25Voltage:24V DC
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 939 ms