Home > Products > Festo solenoid valve

Festo solenoid valve

<FESTO solenoid valve automation infrastructure components used to control the flow direction, belonging to the actuator; normally used for machine control and industrial valves above, control the direction of the medium, so as to achieve control of the valve switch.
Working principle of the solenoid valve closed chamber with holes in differentlocations, each hole leads to a different pipeline, cavity intermediate valve, on both sides of the two electromagnets, which surface of the magnet coil is energized the valve body will be are attracted to which side, through the control valve body moves to block or leak oil discharge hole, and into the hole is always open, the hydraulic oil into the drain line, and then to push the oil through the oil pressure cylinder piston, piston driven piston rod, piston rod driven by a mechanical device to move. So that the electrical current through the control of the electromagnet off on the control of mechanical motion.

Festo MFH-5-1/2-EX Solenoid valve
Festo MFH-5-1/2-EX Solenoid valve
Product Type Festo Tiger Classic valvesShort type code MFHValve Function 5/2 monostableElectrical Connect Via F coil, must be ordered separatelyMounting on manifold railMounting OptionalMounting With through holeManual override DetentingType of reset Mechanical springAmbient temp -5 - 40 °CAssemb
Festo MFH-3-1/8-S Solenoid valve
Festo MFH-3-1/8-S Solenoid valve
Product Type Festo Tiger Classic valvesShort type code MFHValve Function 3/2 closed, monostableElectrical Connect Via F coil, must be ordered separatelyMounting on manifold railMounting OptionalMounting With through holePilot air supply ExternalManual override DetentingType of reset Mechanical sprin
Festo MFH-3-1/2-S Solenoid valve
Festo MFH-3-1/2-S Solenoid valve
Product Type Festo Tiger Classic valvesShort type code MFHValve Function 3/2 closed, monostableElectrical Connect Via F coil, must be ordered separatelyMounting on manifold railMounting OptionalMounting With through holePilot air supply ExternalManual override DetentingType of reset Mechanical sprin
Festo MFH-3-3/4 Solenoid valve
Festo MFH-3-3/4 Solenoid valve
Product Type Festo Tiger Classic valvesShort type code MFHValve Function 3/2 closed, monostableElectrical Connect Via F coil, must be ordered separatelyMounting on manifold railMounting OptionalMounting With through holeManual override DetentingType of reset Mechanical springAmbient temp -5 - 40 Â
Festo MF-4-1/8 Solenoid valve
Festo MF-4-1/8 Solenoid valve
Property ValueShort type code MFDesign structure Poppet valve with spring returnAmbient temp -5 - 40 °CMounting with through holeAssembly position AnyOperating Pressure 3 - 8 barMedium temperature -10 - 60 °COperating medium Filtered, unlubricated compressed air, 40 µm filtrationOperating m
Festo MN1H-5/2-D-1-C Solenoid valve
Festo MN1H-5/2-D-1-C Solenoid valve
Property ValueShort type code MN1HDesign structure Piston slideAmbient temp -5 - 50 °CStandard WithoutStandard ISO 5599-1Mounting with through holeAssembly position AnyOperating Pressure 2 - 10 barMedium temperature -5 - 50 °CProduct weight 550 gOperating medium filtered compressed air, grade
Festo MN1H-2-1/2-MS  Solenoid valve
Festo MN1H-2-1/2-MS Solenoid valve
Property ValueShort type code MN1HDesign structure Diaphragm valveAmbient temp -10 - 60 °CMounting Line installationAssembly position AnyOperating Pressure 0.5 - 10 barMedium temperature -10 - 60 °CProduct weight 400 gOperating medium Filtered compressed air, grade of filtration 200 µm, lub
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 605.2 ms