Home > Products > CKD solenoid valve

CKD solenoid valve

<

CKD solenoid valve is used to control the direction of flow automation infrastructure components, belonging to the actuator; often used for machine control and industrial valves.
Surface, control the direction of the medium, so as to achieve control of the valve switch. Working principle of the solenoid valve closed chamber at different bit open set with holes, each hole leads to a different pipeline, the cavity intermediate valve, on both sides of the two electromagnets, which the surface of the magnet coil is energized valve the body will be attracted to which side pneumatic control valve body moves to block or leak oil discharge hole into the hole is always open, liquid pressure oil enters the drain line, and then through the oil pressure to push the piston of the fuel tank, piston driven piston rod with piston rod moving mechanism moving. So that the electrical current through the control of the electromagnet off on the control of mechanical motion.

CKD MR10-3 solenoid valve
CKD MR10-3 solenoid valve
Description Actuation: Universal type Working fluid:Water,pure water ,chemicals(fluid not to corrode wetted areas materials) Working pressure rang MPa(2): -0.05 to 0.1 Sealing pressure range MPa(3): -0.05 to 0.2 Withstanding pressure (water) MPa: 0.4 Fluid temperature : 5 to 50 Ambient tempe
CKD MR10-2NO solenoid valve
CKD MR10-2NO solenoid valve
DescriptionActuation:NO (normally open )typeWorking fluid:Water,pure water ,chemicals(fluid not to corrode wetted areas materials)Working pressure rang MPa(*2): -0.05 to 0.1Sealing pressure range MPa(*3): -0.05 to 0.2Withstanding pressure (water) MPa: 0.4Fluid temperature ℃: 5 to 50Ambient te
CKD MR10-2NC solenoid valve
CKD MR10-2NC solenoid valve
Description Actuation:NC (normally closed )type Working fluid:Water,pure water ,chemicals(fluid not to corrode wetted areas materials) Working pressure rang MPa(*2): -0.05 to 0.1 Sealing pressure range MPa(*3): -0.05 to 0.2 Withstanding pressure (water) MPa: 0.4 Fluid temperature ℃: 5 t
CKD VXF2160-10 solenoid valve
CKD VXF2160-10 solenoid valve
Product Description: Model:VXF2160-10Port Size:G1’’Max. Operating Differential Pressure: 1.0MpaMin. Operating Differential Pressure: 0.031MpaSection(mm): 27Effective Sectional Area:330CV Value:18.5Exhaust OrificeRC (PT)1/4
CKD VXF2150-06 solenoid valve
CKD VXF2150-06 solenoid valve
Product Description: Model:VXF2150-06Port Size:G3/4’’Max. Operating Differential Pressure: 1.0MpaMin. Operating Differential Pressure: 0.031MpaSection(mm): 20Effective Sectional Area:170CV Value:9.5Exhaust OrificeRC (PT)1/4
CKD VXF2280-14 solenoid valve
CKD VXF2280-14 solenoid valve
Product Description: Model:VXF2280-14 Port Size:G1/2’’ Max. Operating Differential Pressure: 1.0Mpa Min. Operating Differential Pressure: 0.031Mpa Section(mm): 40 Effective Sectional Area:810 CV Value:45 Exhaust Orifice RC (PT)1/4
CKD AB41-04-8 solenoid valve
CKD AB41-04-8 solenoid valve
Standard or Nonstandard Standard Pressure: Low Pressure Power: Solenoid Material: Stainless Steel Temperature of Media: Low Temperature Media: Water Port Size: 6-15A Place of Origin: Japan Model Number: AB41-04-8
CKD AB41-O3-6 03H solenoid valve
CKD AB41-O3-6 03H solenoid valve
model AB41-03-6 03H, normally closed 2-way valve 3/8" npt pipe threads, solenoid 24 VDC
CKD AB31-02-3 brass solenoid valve 100VAC
CKD AB31-02-3 brass solenoid valve 100VAC
Model: AB31-02-3 Port Size: 1/4" Orifice: 3/8" Normally closed AC 100V 50/60Hz, AC 110V 60Hz Body: Brass
CKD 2W500-50 solenoid valve
CKD 2W500-50 solenoid valve
Ordering Code:2W500-50 Acting Type:Normally Closed Jiont Thread Size:2" Orifice:50mm CV value:48 Working pressure:Water, Oil:0.15-0.5 Mpa , Air, gas: 0.15-0.85Mpa Max.pressure :1.05 Mpa Temperature(℃): -5-80℃ or -5-130℃ Valve body: Zinc Alloy, Brass Seal:NBR, EPDM or VITON Medium:Ai
CKD 2W400-40 solenoid valve
CKD 2W400-40 solenoid valve
Ordering Code:2W400-40 Acting Type:Normally Closed Jiont Thread Size:1-1/2" Orifice:40mm CV value:29 Working pressure:Water, Oil:0.15-0.5 Mpa , Air, gas: 0.15-0.85Mpa Max.pressure :1.05 Mpa Temperature(℃): -5-80℃ or -5-130℃ Valve body: Zinc Alloy, Brass Seal:NBR, EPDM or VITON Mediu
CKD 2W350-35 solenoid valve
CKD 2W350-35 solenoid valve
Ordering Code:2W350-35 Acting Type:Normally Closed Jiont Thread Size:1-1/4" Orifice:35mm CV value:24 Working pressure:Water, Oil:0.15-0.5 Mpa , Air, gas: 0.15-0.85Mpa Max.pressure :1.05 Mpa Temperature(℃): -5-80℃ or -5-130℃ Valve body: Zinc Alloy, Brass Seal:NBR, EPDM or VITON Mediu
CKD  2W250-25 solenoid valve
CKD 2W250-25 solenoid valve
Ordering Code:2W250-25Acting Type:Normally ClosedJiont Thread Size:1″Orifice:25mmCV value:12Working pressure:Water, Oil:0.15~0.5 Mpa , Air, gas: 0.15~0.85MpaMax.pressure :1.05 MpaTemperature(℃): -5-80℃ or -5-130℃Valve bodyï
CKD 2W200-20 solenoid valve
CKD 2W200-20 solenoid valve
Ordering Code:2W200-20 Acting Type:Normally Closed Jiont Thread Size:3/4" Orifice:20mmCV value:7.6 Working pressure:Water, Oil:0.15 to 0.5 Mpa , Air, gas: 0.15 to 0.85Mpa Max.pressure :1.05 Mpa Temperature(℃): -5-80℃ or -5-130℃ Valve body: Zinc Alloy, Brass Seal:NBR, EPDM or VITON Me
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 487.4 ms