Home > Products > CKD solenoid valve

CKD solenoid valve

<

CKD solenoid valve is used to control the direction of flow automation infrastructure components, belonging to the actuator; often used for machine control and industrial valves.
Surface, control the direction of the medium, so as to achieve control of the valve switch. Working principle of the solenoid valve closed chamber at different bit open set with holes, each hole leads to a different pipeline, the cavity intermediate valve, on both sides of the two electromagnets, which the surface of the magnet coil is energized valve the body will be attracted to which side pneumatic control valve body moves to block or leak oil discharge hole into the hole is always open, liquid pressure oil enters the drain line, and then through the oil pressure to push the piston of the fuel tank, piston driven piston rod with piston rod moving mechanism moving. So that the electrical current through the control of the electromagnet off on the control of mechanical motion.

CKD  2W250-25 solenoid valve
CKD 2W250-25 solenoid valve
Ordering Code:2W250-25Acting Type:Normally ClosedJiont Thread Size:1″Orifice:25mmCV value:12Working pressure:Water, Oil:0.15~0.5 Mpa , Air, gas: 0.15~0.85MpaMax.pressure :1.05 MpaTemperature(℃): -5-80℃ or -5-130℃Valve bodyï
CKD 2W200-20 solenoid valve
CKD 2W200-20 solenoid valve
Ordering Code:2W200-20 Acting Type:Normally Closed Jiont Thread Size:3/4" Orifice:20mmCV value:7.6 Working pressure:Water, Oil:0.15 to 0.5 Mpa , Air, gas: 0.15 to 0.85Mpa Max.pressure :1.05 Mpa Temperature(℃): -5-80℃ or -5-130℃ Valve body: Zinc Alloy, Brass Seal:NBR, EPDM or VITON Me
CKD 2W160-15 solenoid valve
CKD 2W160-15 solenoid valve
Ordering Code:2W160-15 Acting Type:Normally Closed Jiont Thread Size:1/2" Orifice:16mm CV value:4.8 Working pressure:Water, Oil:0.15 - 0.5 Mpa , Air, gas: 0.15 - 0.85Mpa Max.pressure :1.05 Mpa Temperature(℃): -5-80℃ or -5-130℃ Valve body: Zinc Alloy, Brass Seal:NBR, EPDM or VITON Me
CKD VX2120-15 solenoid valve
CKD VX2120-15 solenoid valve
model : VX2120-15Working Medium: Air, Water, SteamMotion Pattern: Direct Drive TypeType: Normal Close TypeAperture of Flow Rate: 13Joint Pipe Bore: G1/2" Working-pressure: 0~1.0MPaOperation Temperature Range: -5~+80oCMaterial of Oil Seal: NBR
CKD VX2120-10 solenoid valve
CKD VX2120-10 solenoid valve
model : VX2120-10Working Medium: Air, Water, SteamMotion Pattern: Direct Drive TypeType: Normal Close TypeAperture of Flow Rate: 13Joint Pipe Bore: G3/8" Working-pressure: 0~1.0MPaOperation Temperature Range: -5~+80oCMaterial of Oil Seal: NBR
CKD VX2120-08 solenoid valve
CKD VX2120-08 solenoid valve
model : VX2120-08Working Medium: Air, Water, SteamMotion Pattern: Direct Drive TypeType: Normal Close TypeAperture of Flow Rate: 3Joint Pipe Bore: G1/4" Working-pressure: 0~1.0MPaOperation Temperature Range: -5~+150oCMaterial of Oil Seal: VITON
CKD VX2120-06 solenoid valve
CKD VX2120-06 solenoid valve
model : VX2120 Working Medium: Air, Water, Steam Motion Pattern: Direct Drive Type Type: Normal Close Type Aperture of Flow Rate: 3 Joint Pipe Bore: G1/8" Working-pressure: 0~1.0MPa Operation Temperature Range: -5~+150oC Material of Oil Seal: VITON
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 821.8 ms