Home > Products > Brahma solenoid valve > Brahma solenoid valve gas solenoid valve

Brahma solenoid valve gas solenoid valve

GENERAL DESCRIPTION 
This series of solenoid valves is of normally closed type, 
suitable for domestic and industrial applications, supplied in 
alternate or direct current and inclusive of inbuilt rectifier 
circuit which has enabled to make actions as noiseless as 
possible; a metal mesh filter on the inlet prevents the 
entrance of any foreign matters with diameter > 1 mm. 
Thanks to the power-driven unit coupled at the top of the 
valve, it is possible to modulate the flow rate from a minimum 
to a maximum value. Adjustment end strokes can be set up 
by manual calibration on appropriate cams directly on the 
power-driven unit. 
The gas valves of this series comply with the essential 
requirements of the Gas Appliance Directive 90/396/EEC and 
of the European standard EN161. 

Brahma EG30*M.5 gas solenoid valve
Brahma EG30*M.5 gas solenoid valve
Type EG30*M.5 Operating pressure (mbar) 0 ÷ 500 (1) Orifice diameter (mm) 30Connections G1"Weight(g) 3280Coil BE9*G.. Consumption 23
Brahma EG30*M.2 gas solenoid valve
Brahma EG30*M.2 gas solenoid valve
Type EG30*M.2 Operating pressure (mbar) 0 ÷ 350 (1) Orifice diameter (mm) 30Connections G1"Weight(g) 2855Coil BE8*G..
Brahma EG25*M.3 gas solenoid valve
Brahma EG25*M.3 gas solenoid valve
Type EG25*M.3 Operating pressure (mbar) 0 ÷ 500 Orifice diameter (mm) 25Connections G3/4"Weight(g) 1780Coil BE8*G.. Consumption 2
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 863.8 ms